|
|
|
|
|
#2
02-07-2005, 10:15 AM
|
|||
|
|||
|
Tony,
What type of wheels are you reffering to? When going to the 560 wheel I used the 30mm Offset, which worked fine. 380sl Project "refresh" continues.... "Be careful, the 16 inch 15 hole wheels (newer SL - 129), will not fit the 107 without quite a bit of modification. What you want are 15" diameter and a 7" width. The offset is 25mm...very important. These wheels came on a few other non-SL cars so they are out there. The stamp on the back of the rim will read: 7Jx15H2 ET25."
__________________
Rick '85 380 SL (sold) '85 Carrera Flatnose '71 280 SL Signal Red/Cognac 
|
 |
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 1983 380sl 107 replacing ign key tunmbler | timthetoolman | Tech Help | 1 | 06-19-2004 04:49 PM |
| Help! 1985 300D I forgot to match mark Pulley, Balance Plate and Timing Wheel! | Carrameow | Diesel Discussion | 1 | 04-17-2003 01:09 PM |
| Killing the 16"x8" SL wheel Idea for my 380SL....... | RickM | Mercedes-Benz Wheels & Tires | 1 | 03-26-2003 07:56 AM |
| increasing wheel size on 380SL | OHarrah | Mercedes-Benz Wheels & Tires | 1 | 03-20-2003 08:44 AM |
| Options for new steering wheel 1985 190E 2.3 8v | odelag | Tech Help | 2 | 05-24-2002 05:20 PM |
Linear Mode
