PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes-Benz SL Discussion Forum (http://www.peachparts.com/shopforum/mercedes-benz-sl-discussion-forum/)
-   -   Windshield decal location needed (http://www.peachparts.com/shopforum/mercedes-benz-sl-discussion-forum/164156-windshield-decal-location-needed.html)

KCM 09-10-2006 01:08 PM

Windshield decal location needed
 
Hi Folks,

Searched the archives to no avail (though I thought I saw it somewhere). Can somebody out there please give me dimensions for the original location of the Diamler-Benz windshield decal on the lower right corner of the windshield of a 560SL? Dimensions from the lower right corner of the windshield to the lower right corner of the decal would be fine. I'm sure the location wasn't identical for every car made, but right now I have no idea where is should be located. Thanks.

page62 09-10-2006 08:07 PM

I think this was a dealer installed decal. Why? In my C320, it has a decal for a local car wash closest to the right pillar, then the signature decal....

Roncallo 09-11-2006 06:13 PM

Quote:

Originally Posted by page62 (Post 1272425)
I think this was a dealer installed decal. Why? In my C320, it has a decal for a local car wash closest to the right pillar, then the signature decal....

These are not dealer installed, at least not pre 1990, otherwise I would have installed at the dealer back then.

John Roncallo

Lee Blaik 09-12-2006 12:51 AM

One inch from the A post.
One inch from the windshield bottom.
Peel the back of the decal and apply the tip only to the windshield for the correct distance as the decal should look fairly horizontal and not as to follow the curvature of the windshield bottom.
You can check the perfect fit from the outside before pressing the whole decal, and of course you press from the center out in order to avoid any creases.
Good luck.
Lee

KCM 09-12-2006 10:44 PM

Lee,

Thanks for the info. I sure appreciate it. One of those finishing touches I need to do yet.

Kevin


All times are GMT -4. The time now is 08:03 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website