|
|
|
#1
|
|||
|
|||
What does this trim clip look like?
Does anyone have a clue (or better yet a pic) of what this trim clip is supposed to look like? The first pic below shows what's left of the original.
I'm replacing a front fender and addressing a couple "issues" while I'm at it. Any info is appreciated.
__________________
Rick '85 380 SL (sold) '85 Carrera Flatnose '71 280 SL Signal Red/Cognac |
#2
|
||||
|
||||
actually the ends of the trim strip have a small screw that connects the trim around the lip of the fender, I have many clips lying about, i will check to see what else may work in that area
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
#3
|
|||
|
|||
Ron,
Thank you for the offer. I've attached a pic of the clip after removal. I'm guessing the butt end of the bolt has a square or rectangular piece that fits into the channel of the chrome rocker trim piece. If you have one of these I'd be very appreciative if I could purchase from you. FWIW, I cleaned all the oxidation away and found that it was all superficial....Phew. After getting down to bare metal I coated with two applications of POR 15. Amazing stuff and now well protected. Thanks again.
__________________
Rick '85 380 SL (sold) '85 Carrera Flatnose '71 280 SL Signal Red/Cognac |
#4
|
||||
|
||||
will do, I know I have something that will work, give me a day or two.
Good news on the rust issue
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
#5
|
||||
|
||||
Rick, I have every kind of clip except the one you need
I have the plastic do dads, red ones, clear ones and everything in between but it seems like the one you need is prone to rust and they do not live on in the parts boxes You may try this ( I did it on my 220) Fabricate or retrofit and existing clip that you can screw in and then "slide the trim piece on. My buddy has a 80's 450SL parts car,if I get by there I will look, but may be the same deal there.
__________________
Ron 2015 Porsche Cayman - Elizabeth 2011 Porsche Cayman - Bond,James Bond Sadly MERCEDESLESS - ALways LOOKING ! 99 E320 THE Queen Mary - SOLD 62 220b - Dolly - Finally my Finny! Sadly SOLD 72 450SL, Pearl-SOLD 16 F350 6.7 Diesel -THOR 19 BMW X5 - Heaven on Wheels 14 38HP John Deere 3038E Tractor -Mean Green 84 300SD, Benjamin -SOLD 71 220 - W115-Libby ( my first love) -SOLD 73 280 - W114 "Organspende" Rest in Peace 81 380 SL - Rest in Peace |
#6
|
|||
|
|||
Ron Thanks for checking. I'll bet your right regards these clips being prone to rusting. I should be able to fabricate a replacement out of stainless.
Thanks again!
__________________
Rick '85 380 SL (sold) '85 Carrera Flatnose '71 280 SL Signal Red/Cognac |
Bookmarks |
|
|