Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help

Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

LinkBack Thread Tools Display Modes
Old 09-12-2007, 06:21 AM
Registered User
Join Date: Sep 2004
Location: Dublin, Ireland
Posts: 385
Idler Bushing Replacement

Hi All,

Searching the posts I've seen that a number of you have replaced these bushes. According to the workshop manual the drag link and track rod must be seperated from the arm and special tools are required to pull the bushes and perform measurements afterwards.
My question is, after removing the bolt can the idler arm just be swung out of the way while the bushes are replaced and are special puller tools really required.

Thanks for any responses,

Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -4. The time now is 03:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page