|
|
|
#1
|
|||
|
|||
Help needed
New to Forum.First time owner of 1981/380SL.My wipers will not settle in the down position (against bottom of windshield) when I shut wipers off.Can it be the windshield wiper relay?If so, where is it actually located?Or could it be the directional/wiper switch assembly or possibly both?Also,is there a contact out there that has an assembly manual for my car?The type of assembly manual I'm looking for would have diagrams of all the parts, part numbers, etc.Really appreciate everyones help.
|
#2
|
|||
|
|||
Parking position is done thru the motor.
Many SL's have with the wiper bellcrank comming loose from it's mount & causing problems.
__________________
MERCEDES Benz Master Guild Technician (6 TIMES) ASE Master Technician Mercedes Benz Star Technician (2 times) 44 years foreign automotive repair 27 Years M.B. Shop foreman (dealer) MB technical information Specialist (15 years) 190E 2.3 16V ITS SCCA race car (sold) 1986 190E 2.3 16V 2.5 (sold) Retired Moderator |
#3
|
||||
|
||||
Quote:
__________________
Question Authority before it Questions you. |
#4
|
|||
|
|||
Make sure you're expecting them to land in the right place, which is not all the way down to the lower edge of the windshield. On mine, the end of the wiper arm where it connects to the center of the blade is almost 2" from the windshield frame. When I first got the car, I wondered if this was correct but it's fully to spec.
__________________
Craig Bethune '97 SL500, 40th anniversary edition '04 Olds Bravada (SWMBO's) '06 Lexus ES330 '89 560SL (sold) SL--Anything else is just a Mercedes. (Kudos to whoever said it first) |
#5
|
|||
|
|||
Thanks for everyones response.Will check out relay,etc.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|