Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-04-2008, 02:45 PM
Dennis's Avatar
Registered User
 
Join Date: Feb 2008
Posts: 24
Talking control

will a climate control from a 450sel fit a 450sl?? Thaks, Dennia

Reply With Quote
  #2  
Old 03-04-2008, 03:25 PM
Registered User
 
Join Date: Dec 2007
Posts: 59
Climate Control Interchange

If you mean a servo from a 116 chassis 450SE/SEL then the answer is yes. The 126 chassis 450SE/SEL uses an entirely different system. If you replace the servo then chances are you're going to need the amplifier as well. What is the year of the donor car?

The 116 chassis servo is actually a different part number than the 107 chassis version (450SL) but the difference won't affect the performance of the system. Worst case the temperature set on your thumbwheel would shift by a few degrees.
Reply With Quote
  #3  
Old 03-04-2008, 04:26 PM
Dennis's Avatar
Registered User
 
Join Date: Feb 2008
Posts: 24
the doner is a 1979 450 sel---the part i am refuring to is the climate control the wheel in the car,i have a new servo out on the right side of the eng. bay--has a silver bottom. Thanks, Dennis
Reply With Quote
  #4  
Old 03-04-2008, 07:09 PM
Registered User
 
Join Date: Dec 2007
Posts: 59
If you're referring to the thumbwheel, yes that will fit your car. You'll still need a meter to test it.
Reply With Quote
  #5  
Old 03-05-2008, 07:28 AM
Dennis's Avatar
Registered User
 
Join Date: Feb 2008
Posts: 24
thats good news,i got it for 5.00, i pulled off the car myself. Thanks ,Dennis
Reply With Quote
  #6  
Old 03-05-2008, 12:18 PM
Registered User
 
Join Date: Dec 2007
Posts: 59
Good Find

Don't forget to check it with an ohm-meter before you install it. You should get about 300 ohms or less at 65F setting, 1600 ohms or higher @ 85F.
__________________
Steve S
Support Tech
UnwiredTools, LLC
www.unwiredtools.com

1982 380SLC
1994 E320TE
1998 E300DT
Reply With Quote
  #7  
Old 03-05-2008, 06:31 PM
Dennis's Avatar
Registered User
 
Join Date: Feb 2008
Posts: 24
i will be sure to do that ,Thank you for the information, Dennis

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page