Quote:
Originally Posted by CAPTBILL2001
I Have A 1980 450sl. The Drivers Seat Belt Will Not Go In Or Out, I Can't Pull It Out. How Do I Get To The Base To See What Wrong. Thanks, Bill
|
You have to remove the rear quarter panel. Take off the chrome cap, remove the screws down the front and slide it out by pulling down and in toward the center of the car. Oh, yeah, you need to take the handle off. Look down from the top at the back of the large handle and you'll see a metal loop. Use a screwdriver and push forward on that loop and the plastic insert in the center of the handle will pop out. The large handle then comes right out, followed by the small handle. The plastic insert is what holds the handle on, if you look at the back once it's popped out you'll see a metal tab that hooks into a slot on the post. To put it back on make sure that hook is in the slot and then pop it back in.