|
|
|
#1
|
|||
|
|||
Becker Europa II Help
I am removing the after market CD from my 76 450SL and trying to install a found Becker Europa II. Unfortunately, the wiring terminal connections were cut and formed into a new wiring harness for the pioneer head. Was hoping that someone perhaps was doing the opposite and would save the terminal ends with enough wire to help me identify the correct wire....or if someone just happened to be fooling around with their radio and could tell me which color wire goes to which port on the back of the unit.
Thanks!
__________________
Birmingham, AL 2006 Audi A4 "Audrey"-daily driver 1976 MB 450SL "Marlene" 2000 Jetta VR6 "Julia"-traded at 220k miles 1997 Jetta 2.0Trek "Blanche"-traded at 450k miles YES 450,000 miles 1986 Prelude "Gladys"-died at 120K miles |
#2
|
|||
|
|||
You could try looking at www.beckerautosound.com for your year/model car and then in "service" sub catgory "harness".
__________________
Resistance is Futile. |
Bookmarks |
|
|