|
|
|
|
|
#1
10-11-2008, 04:48 PM
|
|||
|
|||
|
'Scraping' sound during right turn
When I turn right in my 1980 450sl (right only-not left) I hear a 'scraping' sound from the rear. Sounds like something scraping on the brake rotor. But I took it to a very good shop and they couldn't find anything wrong. Would bad subframe mounts cause this, or a cracked brake pad, or a defective axle? I'm stumped and so is my mechanic.
Last edited by lvbizbroker; 10-11-2008 at 04:51 PM. Reason: model & year 
|
|
#2
10-11-2008, 05:10 PM
|
||||
|
||||
|
likely the arm that attaches the sway bar from the body to the axle hub, that either break or the joint pops loose, usually they will rub on the wheel when turning
__________________
1967 250 S 1967 280SE 1968 250S 1971 280 SE 1973 220 1974 280 S 1975 450 SEL 1976 220 D 1979 300SD 1983 300 SD 1985 230 TE euro 1986 280SL 1986 500 SEL euro 1986 190E 2.3 1990 300 SE 2003 C230 K 2004 C230 K 1987 560SEL 1987 300SDL now in canada 2005 C230 1998 C43 AMG Sold to DON 1993 190E 2.6 300TD Former daily driver Totaled current: R320 CDI Ram 2500 Cummins
|
 |
| Bookmarks |
|
|
Linear Mode
