'96 SL500 antenna replacement

[halfwhit]

Looks like I have to replace the whole motor unit if I can hear
the motor running but the antenna does not extend or retract?

(Used to be a nylon cable drive in the old S-class diesels I drive.
Just needed to replace the mast.)

Cheers,
Richard

[jaybro]

Remove the nut on the fender, turn on the radio and the antenna should jump out, if not pull on it with the antenna motor running. Good Luck

[tecqboy]

If the antenna is a Hirshmann, check their web site for a fix-it kit. I believe that they still use a nylon drive cable.

[ARNOLDLewis]

If the actuator motor is receiving power then check the ground for the system. Sometimes the connection is loose or corroded. A simple cleaning or tightening can correct our problem. If ground circuit is good, replace the antenna unit.

[123steven]

Originally Posted by ARNOLDLewis

If the actuator motor is receiving power then check the ground for the system. Sometimes the connection is loose or corroded. A simple cleaning or tightening can correct our problem. If ground circuit is good, replace the antenna unit.

Where can i find a scehmatic or a illistration on how to replace the antenna