P/S box removal 500SL
 

Hi
Can any one tell me how to get the power steering box out of a 500SL (91) I can see that the pitman arm will come fairly easy and the steering shaft should be easy but the hyd lines I cant even see where they are attached to the box.
I need to change the seal in the input shaft.
Thanks
Chuck

if it is like the earlier SL's it is a tough job, it can be done without a lift , but it makes it difficult. Exhaust bank may need to be removed, actually the box itself only has two bolts to the frame, manuvering for removal is the tough part