Reseal on steerig box 500SL
Hi Can any one tell me where I can find info on resealing a steering box on a 91 500SL.
Thanks Chuck |
|
David, that was a superb write and so well documented that Whunter should pin it on the Resources DIY articles. There is nothing like it there!:eek:
Your Corvette project was truly amazing. How long did it take you?. |
Actually it is already in there. Glad that it was helpful.
|
90% of the time its the lower seal leaking and it can be replaced right in the car. Getting the Pittman arm off can be a *****.
|
Reseal on steerig box 500SL
Hi Guys
Thanks for the replys, unfortunetly the leak is from the input shaft seal so in this case the whole box has to come out and appart. The pitman arm came of very easy as it is on a straight spline with a pinch bolt, which when removed the arm almost fell off. It is going to the dealer tomorrow. Chuck |
All times are GMT -4. The time now is 03:02 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website