Need help to find possible vacuum leak
'75 450SL
When I shift out of neutral, the engine drags down enough that it dies. I also cannot control the idle with the air slide valve to any great extent. I replaced the vacuum tubing for the emissions and distributor advance / retard systems, but now this problem started up. How is the vacuum to the transmission routed, to get it to disengage the tranny until the engine RPM's build. While I was underneath the car for 2 weekends, I couldn't find anything obviously wrong. Any suggestions or ideas??? Thanks, Scott |
All times are GMT -4. The time now is 08:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website