timing chain and cam timing 500SL M119 eng
Hello,
I am setting up the cam timing on a 1990 500SL (double overhead cam engine). The factory CD is not clear on the initial line-up procedure for setting the four cams.Can anyone clearify this for me? Thanks, Joe Alexander Blacklick,Ohio |
From alldatadiy
1. Position engine to 45° before ignition TDC at No. 1 cylinder by cranking engine at crankshaft in direction of rotation of engine using special tool 001 589 66 09 00. 2. It must be possible to pin all 4 camshafts with the pins (1), special tool 111 589 03 15 00, through the 6.5 mm dia. holes in the first camshaft bearing caps. |
'88 560SL
Hi, Just bought an '88 560SL with 74,000 miles. Runs great! I want to keep it that way, so I'm going to do the timing chain thing. Can you please guide me thru the proceedure. Parts are easy to get, but I find the bottom guide is not usually replaced. Chain, tensioner, plastic guides & ? Thanks in advance for any advice. John B in So Utah
|
Hi,
I can give you a detailed description of adjusting cam timing- if you still need it. Let me know! Peter C. Sessler |
All times are GMT -4. The time now is 05:01 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website