I changed the ignition switch now what?

[ewenjo]

The ongoing saga!

I was having issues with the ACCIII climate control system. I replaced the blower regulator.. no change. Still had intermittant blower operation. I was told it may be the ignition switch / lock cylinder. As instructed I "wiggled" the key switch and didn't perceive a change. But now the car does not start. So since my lock cylinder was a little sticky I decided to change it. And also changed the ignition switch.. hoping that was the reason fo rthe car not starting. I successfully changed these items but THE CAR TURNS OVER BUT STILL DOES NOT START! It started immediately befORe I started the "wiggling". So I need some expert advice.

I smell gas when I try to start so I assume the fuel sIDe may be okay but I didn't check at the injectors. It seems to be an electrical issue ( again I did not yet to see if I get a spark at the plugs) . I checked the fuse box.. all fuses are okay. Is there any other fuse links etc located outside the fuse box that need checking?

Any insight would be appreciated.

As always... thanks in advance.