1990 300 sl the soft top has two brackets that were put in incorrectly by someone else and I am having a tough time trying to figure out how to correctly re-install the rods. The rods are on the soft top assembly about halfway between the front of the soft top and rear of the passenger and drivers window. They connect a chrome rod about 10 inches long from the soft top frame to a support bar in the soft top ( The soft top support bar that reaches across from one window to the other window and is located 8 inches behind the front edge of the soft top. ) Can anyone send me a picture of the correct positioning of the bars? Preferably with the soft top halfway between open and closed. Thanks John