|
|
|
#1
|
|||
|
|||
8mm Dog Leg Offset Allen wrench
I desperately need to buy or rent the dog leg allen wrench needed to remove the heads on a 81 380sl without pulling the engine. Is there another tool that work? Thanks, Bob
|
#2
|
|||
|
|||
8 MM = 5/16" so that opens up the range of possibilities. You can get sockets that have an allen sticking out of them. Sometimes you can find removable allen bits and use a box wrench to turn it.
|
#3
|
|||
|
|||
__________________
Past mb: '73 450sl, '81 280slc stick, '71 250, '72 250c, '70 250c, '79 280sl, '73 450sl, parted: '75 240d stick, '69 280s, '73 450slc, '72 450sl, |
#4
|
||||
|
||||
Good stuff Fonzi. I bet it would be hard to find a 5/16" that looks like that
__________________
Graham 85 300D,72 350SL, 98 E320, Outback 2.5 |
Bookmarks |
|
|