Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Mercedes-Benz SL Discussion Forum

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-03-2002, 02:39 AM
Registered User
 
Join Date: Jun 2002
Location: Melbourne, Australia
Posts: 91
Question Ignition module 82 500 SL

Has anyone found a suitable replacement coil drive transistor for the ignition modules in the w107 SL's? The Bosch part number for the module is 0 227 100 023.

The original transistor seems to be a high powered darlington of sort with a Bosch lable on it, which would be impossible to get hold of. I have tried an MJ10012 but would have to limit the base current as it was driven to hard and died.

Limiting the drive may also effect the feedback to IC1 and effect the pulse timming, so I would prefer to find a transistor which could handle the base current supplied by IC1.

If anyone has any ideas in this or have found a suitable replacement for both the transistor and IC1 if it ever goes, please let us know.

Regards Damian
Reply With Quote
  #2  
Old 09-08-2004, 11:55 PM
TwitchKitty's Avatar
Just fix it
 
Join Date: May 2004
Location: Varies
Posts: 3,322
Bump, anyone ever find a replacement for the transistor?
1975 450SEL Request for Help to Get Running

Last edited by TwitchKitty; 09-09-2004 at 12:06 AM.
Reply With Quote
  #3  
Old 09-09-2004, 12:29 AM
Strife's Avatar
General Purpose Geek
 
Join Date: Apr 2004
Location: KY USA
Posts: 2,238
an ST BU931T might be worth looking at. 1A base, but 5 peak. It's only in a TO-220, so I can't say how it would be thermally. It is auto-rated, though. A cross showed a TIP152, but that doesn't look good enough.

If you can crack this nut, you could probably start a tidy business.
Reply With Quote
  #4  
Old 09-09-2004, 12:59 AM
afmcorp's Avatar
Registered User
 
Join Date: Jan 2002
Location: NW Indiana LaPorte
Posts: 571
if there is an identifier number i'd give Newark Electronics they have an 800 number. they are hugh and might be able to cross it. i get all my electronics from them for my CNC equipment. just a suggestion for a solution.

another way to go is to buy from petronics for about 70 bucks and replace all that nonsense. i will do that to save my switch cause i plan on the 72 being all original. but to merely drive it the petronics is a much stronger ignition. here they are http://www.vintageperformance.com/retrorockets/index.htm
__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!
Reply With Quote
  #5  
Old 09-09-2004, 12:50 PM
TwitchKitty's Avatar
Just fix it
 
Join Date: May 2004
Location: Varies
Posts: 3,322
Thanks for the replies, I posted pictures of the igntion module in the thread that is linked above.

I will be posting what I ultimately find there also.
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page