|
|
|
#721
|
|||
|
|||
Dave Pasch
Jim please contact me about my part. Paid Oct 16 2007 $69.00 Send me shipping info please. You have not responded to my emails. Dave davepasch@bellsouth.net
Dave, here is the UPS Tracking Number.. Sorry for the delay. 1Z4324100344104140 thank you for your purchase... Jim
__________________
James A. Harris |
#722
|
|||
|
|||
Outside temp display
I am looking for the connector for the outside temp display (on instrument cluster). I need the 5 pin version with a few inches of wire attached.
regards, John |
#723
|
|||
|
|||
Outside Temp Display
avmech Outside temp display
I need the model and year of your car... thanks.... Jim
__________________
James A. Harris |
#724
|
|||
|
|||
Temp Display
I can't really say for sure what year it's from. I am trying to install the outside temp diplay in my 83 300D. To my knowledge, there are only 2 types of connectors for the temp display. 1) A 4 pin square connector or 2) a straight (pins next to each other in a line) 5 pin connector. I need the 5 pin version for the temp display I have. I think the 5 pin may be the later of the 2 types, as the 5 pin is from the speed sensor to keep from adding temp while driving. I can try to reasearch further if necessary. How many cars with temp display do you have?
John Looks like 4 pin before 9/87 and 5 pin after Last edited by avmech; 10-28-2007 at 10:26 AM. Reason: Added info |
#725
|
||||
|
||||
Need 123 RF Fender
Jim:
I'm looking for a right front fender for a 123. I think it's a pale yellow, but I've only seen the car in pictures and haven't bought it yet. If you can give me a price based on whatever colors you have, I'll check it out the Saturday and confirm the color. Do you have any ideas as to how much it would cost to ship a fender to Oregon? I'm going to email and PM you as well. Thanks |
#726
|
|||
|
|||
Do you have the seat heater module for the 90 300e? Should be under the rear seats, under the convience module, drivers side?
|
#727
|
|||
|
|||
do you have a tow hook cover for 1988 124
|
#728
|
|||
|
|||
Addbhpc
Do you have the seat heater module for the 90 300e? Should be under the rear seats, under the convience module, drivers side?
I will check and see if I have a heater module... Jim
__________________
James A. Harris |
#729
|
||||
|
||||
Jim, do you have the hard plastic trim panel from a 124 trunk that goes under the lip of the trunk and surrounds the license plate lights? If you do, and I buy it, would also like to get a black 124 sunvisor clip like you pictured way back on page one of this never-ending market!
Thanx
__________________
W108M117(1972) repaired after deer hit W124M103(1987) W124M103(1989) -- sold to son's friend W124M119(1993) -- W124M103(1987 -- 5 speed Euro) - sold to forum member W124M103(1989) -- TE W123OM616(1977) W201M103(1990) parts car |
#730
|
|||
|
|||
I'm in need of a turbo downpipe off a 123 body. Would you happen to have one. If so, how much shipped to L6Z3T9 Brampton?
|
#731
|
|||
|
|||
This might be a long shot, but I'm looking for the front section of the exhaust system for an 82 300SD. The part that goes down and then starts to the back of the car. Thanks.
__________________
Chris 82 300SD |
#732
|
|||
|
|||
I need a grill assembly and both head light assemblies for a 126, the newer the better and if you've got Euro lights, I'd take those.
|
#733
|
|||
|
|||
also, what do the interiors on the 126's look like?
|
#734
|
|||
|
|||
Do You Have A Cover For The Drivers Side Fog Light On The Rear Of The Headlight Assembly? I Also Need A Tow Eye Cover. 1989 560sel
|
#735
|
|||
|
|||
Do you have BEIGE High Mount Brake Lamp Housing???? Also in need of Drivers door moulding clips
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
The 126 does have a Monovalve | Lucy | Tech Help | 3 | 03-16-2010 11:38 AM |