hihosilver
 

the pic is on page 46 and its drivers side door panel and passager side seat switch that I already paid for, all for a 86 300e

I don't know why but somehow my pages start with 1st and end with 27.. I guess after a period of time the pages start allover.. so I can't find any pages in the 40's. my email is jimh16671836@yahoo.com Please send a pic...

Hey Jim
 

Looking for the zebrano wood shifter console area. with or without switches.In at least fair position.Mine is cracked in multiple areas.
82 300 DT.:drummer:

console window switch and fuel injector line
 

Hi Jim,

would you have a console window switch and #6 fuel injector metal fuel line that would work on my 87 300td turbo station wagon?

parts
 

Thanks for the heads up on the parts.
My wish list for my 1990 300D:
1. Center dash air vent assembly (grills with working levers)
2. Front dash speakers
3. Passenger side dash air vent assembly
4. Working Hall effect speed sensor
5. Working cruise control amp
6. gear shift (auto) zebrano panel
7. Various climate control parts (we will address if a model you have will interchange with my 300D and after the above parts are discussed)
Thanks, vespucci

123 Front Sheet Metal
 

Jim:

I sent you an email yesterday concerning the parts we talked about several weeks ago for an Ivory 123 and want to know if you received it. I'm ready to place an order at your earliest convenience.

mb300se65 (aka Jerry)

How about a heater blower motor for a 1980 116 chassis 300SD?

Jim:

I got the $877.00 sent to you this afternoon via PayPal, which included the $34.00 for the hood hinges.

Jerry

Do you still have the air conditioning switch on either of the w-115's, it should be on the center console and have the thermostat tube linked by copper tube to the back of it.
Thanks

Bumper pieces
 

Do you have any front bumper parts for a 74' 240D? I cracked in half one of the two fist-sized rubber bumpers on the front of the car. The horizontal smaller rubber pieces are fine but the big rubber bumper is toast. Thanks...

Pictures
 

Can you send me some pictures of what part you need for the front bumper??? Jim

I am looking for a posi or limited slip rear diff for my 86 300E. Have anything that would fit?

1993-300e 3.2
 

I have the differential from a 1993-300E 3.2. But I don't know if it has positraction or limited slip???? Where can I find out??? Jim

If you turn one axle while holding the pinion yoke, the other axle should spin the same direction or not spin, if it turns the opposite direction it is an open diff. Or you can pull the cover off the housing and see if there are 4 spider gears with an open center or a conglomoration of stuff in the center.

Do you have any of electronic portion of the speedometers from one of the W126s?

I have an 87 420SEL with a dead speedo and odometer.

Look
 

I will check and see if I have anything for the speedometer pickup etc??? Jim