Recently I posted in the diesel discussion that I was coming into this vehicle. Well I am going to be parting her out. The chassis is fairly rusted and not worth repairing (to me anyways) I plan on keeping the engine and various components that will fit my (2) 124's if there is any interest in other parts off of her, let me know and I will state their availability and condition, we can discuss payment and shipping from there. Any parts left after 30 days will be put on e-bay I figured this forum may like to have first crack at her. I can take pictures of specific things if needed. I will be checking the forum often for responces and requests. When I get home I will get some pictures of her to put with the post

exterior: white
interior: grey

Also posted in the diesel discussion forum

__________________
Dean

Any idea if the A/C compressor is good?

__________________
87 300SDL 278,000mi - RIP
82 300SD 260,000mi - RIP
84 300D 178,000mi - SOLD
90 420SEL 178,000 - Daily Driver

This message was generated using 100% recycled electrons.

I doubt it, but I can check tonight.

__________________
Dean

The ac had the wires disconnected near the driver side headlight. (condenser?) I could not test the A/C

__________________
Dean

thanks for checking

__________________
87 300SDL 278,000mi - RIP
82 300SD 260,000mi - RIP
84 300D 178,000mi - SOLD
90 420SEL 178,000 - Daily Driver

This message was generated using 100% recycled electrons.

Is the armrest in good shape? I also need a rear seat but suppose that would be too hard to ship.

__________________
87 300SDL 278,000mi - RIP
82 300SD 260,000mi - RIP
84 300D 178,000mi - SOLD
90 420SEL 178,000 - Daily Driver

This message was generated using 100% recycled electrons.

it might be Ill have to check

heres a link to my web page and some pictures
http://webpages.charter.net/deanot442/

#416 shows the back of the rest but not very good.

__________________
Dean

I could use the small piece of wood trim work on the further most
right hand part of dash...

i could also use a tire and rim for a spare...


if the interior is gray i could use some more items..



how many miles i might even need a transmission...

morganfrmn at yahoo dot com

I also need the bracket that holds the alternator on..

There is 155k on the eng/trans, but I was hoping to keep those (I still need to assess whether or not the 126 and 124 shared the same trans) If it turns out they are not the same where are you located?

__________________
Dean

The interior seems to be the same color as mine, so here's my list:
-front seat bottom cover only
-front seat back cover only
-rear headrest cover, or would take the whole headrest if unable to remove just the cover
-oil cooler with lines and anything that holds it (PO bypassed mine with a pipe and cut off the flared ends)
-what kind of condition are the floor mats in?
-how are the 'B' pillar covers (are they torn around the seat belt retractor?)
-ambient temp display in cluster as well as the sensor that runs up and attaches behind the front license plate
-if the previous poster doesn't take it, I'd also like the far right side dash wood (if it's not broken at the corner)
-one nut that holds the oil filter housing lid on (14mm?)
I'll let you know if anything else comes up. Just out of curiosity, what number is the head, 22?

Thanks
David

__________________
_____________________________________________

2000 Honda Accord V6 137k miles

1972 300SEL 4.5 98k miles

_____________________________________________

Though I think I have a little more testing to do, do you know if the PBU for the ACC works as it should (right temp, proper blower speed, correct vents) Mine intermittently won't blow on high speed and won't blow through the center vents for A/C.

Thanks Again
David

__________________
_____________________________________________

2000 Honda Accord V6 137k miles

1972 300SEL 4.5 98k miles

_____________________________________________

David
The above items that are not marked "spoken for" are still available and can be purchased. Can you please PM me with your request so that I might keep better track of the parts you want? also the Climate control is spoken for I believe.
On a side note, the issues you seem to be having with your CCU may actually be your blower motor and or your vaccuum actuators for your vent control and not the CCU

__________________
Dean

A friend of mine is looking for the passenger side, headlight plastic trim cover. Do you have one available and if you do what would the price be? Thanks!

It's for an '86 300SDL

What condition is it in eg chrome? Price and could you send me a picture of it?

Thanks Brian

How about the headlight surrounds. esp need the passanger side.

__________________
87 300SDL 278,000mi - RIP
82 300SD 260,000mi - RIP
84 300D 178,000mi - SOLD
90 420SEL 178,000 - Daily Driver

This message was generated using 100% recycled electrons.