|
|
|
#1
|
|||
|
|||
WTB- Lug bolts for W126
I need lug bolts for a set of rims that I got. The rims are the "92 Style" but did not come off an S- class, I think they came off an early 90's e-class?? Well I am missing some bolts and need the rest to complete my set. The ones I have now are about 4inches long with no cone and fit perfect on my 560sel. I have tried looking everywhere for this style bolt and no one has it or even something similar.
|
#2
|
|||
|
|||
Have you checked with your dealer? Think they are not too $$$.
__________________
-Marty 1986 300E 220,000 miles+ transmission impossible (Now waiting under a bridge in order to become one) Reading your M103 duty cycle: http://www.peachparts.com/shopforum/831799-post13.html http://www.peachparts.com/shopforum/831807-post14.html |
#3
|
|||
|
|||
the dealers dont carry the bolt i need. They only carry the super short one
|
#4
|
||||
|
||||
[IMG]http://***************/secure/PartImages/1244000770.jpg[/IMG]
how bout that? "Wheel Lug Bolt/Stud; Long Shank With Shoulder; 3-1/3 inches Overall Length (85mm) For models with alloy wheels, with original style with offset shoulder for wheel covers. Please verify overall length and appearance of existing bolts prior to ordering." $6.47 - www.*************** |
#5
|
|||
|
|||
the bolt with the cone is no good. One, it wont fit my rim becuase of the cone and two- when the bolt breaks, you will have to machine it out and thus cannot take the rim off in the mean time
|
#6
|
|||
|
|||
Every MB rim I've ever seen uses a cone. Don't assume that since it came off of MB that it is an OEM rim. What's the part number on the rim? Does it have the star on it? If you have some aftermarket wheel you need to identify it so that you know what lugs you are looking for to matrch it. E-bay comes to mind as a source. If all else fails, a good machine shop can fabricate using those you have as a sample (assuming they are correct). Also, why the breakage concern? Sure, some do because of corrosion or overtighening but its in your garage so you can be aware of the conditions. Good luck with the project.
__________________
Hanno '79 6.9 Sold (after 27 years) '83 280SL, 5 spd. '94 E320 Sdn. 5 spd conversion '02 E320 Sdn.(on loan to mom!) '87 300E (5 spd. conversion) Sold '05 E500 Wagon |
#7
|
||||
|
||||
in my previous post, the one with the picture from ********, thats the same exact style bolt i have--with the cone. my bolt is ~83-84mm. (just about 3-1/4") I have had these for about 6 years now. No trouble or anything. I have never really worried about lug bolts breaking.
I had no luck with Adsitco on the center caps either. They dont sell them. |
#8
|
|||
|
|||
The bolt I need looks exactly like the one pictured above but NO cone. I have bought lug fitting a 93 s class but it was to wide and didnt go through.
Last edited by Two560Two; 12-16-2005 at 02:20 AM. |
Bookmarks |
|
|