Wanted to buy, 107 windshield fluid bottle.

[Grammabud]

I only need the vessel, not the pump etc.
Any help greatly appreciated.
Many thanks,
Bud

[450slcguy]

good luck, took me 7 months of following up on every lead possible, finally bought one last week,awaiting delivery now. You can but new for about $130

[MTUpower]

There is a 500SL in the yards here I'll check it tommorrow, and post later if it does have a bottle.

[bhatt]

Mine had a crack in it and I used something called "Plastic Weld" to fix it. Since it's not under pressure, unless you have a huge hole in it, just fix the one you have.

I remember the price being well over $100 when I looked.. way too expensive!

The plastic weld is made by the same company that makes the two-part epoxy in a tube (the one with two tubes "attached together" so they mix when you use it). The tube looks the same, just a different type of glue inside.

Mix some up and plug away. Use a spare piece of plastic as a plug if you have a hole. Make sure the bottle is CLEAN and absolutely DRY before you try this. You might want to file away a bit of the good plastic so the edge is rough and you are sure it is clean.

Neal

[Grammabud]

I'll give it a try as soon as I find the plastic cement.
Many thanks..

[bhatt]

Looks similar to this:

http://superglue.supergluecorp.com/15277.html

Although I think the one I saw was called "Plastic Weld" or something. Pep Boys will certainly have it.

Glad to have helped. Had a 560SL.. those R107's really turn heads when you drive by!

Neal