|
|
|
#1
|
||||
|
||||
87- 300 tdt 603.960- *WANTED* CYLINDER HEAD
WANTED TO BUY.
I need a good used #17-up cylinder head for my tdt. I would consider a cherry reasonably low mile 14 if the price is right. Mine lasted 255+k. 90-95 3.5 heads will work as well. Any info on a brand new casting deal would be appreciated as well. I would also consider buying a complete lower mile engine/long block assy. I do not need the turbo or injector pump. Thanks, Steve
__________________
87 TDT 256k and Smooooth 92 500SL 06 TDI |
#2
|
|||
|
|||
Good #18 603 head.
Quote:
This head has been pressure tested to 45PSI and is tight. It actually did not leak before the work was done, but we wanted to be sure! I have spent about $500, plus my labor removing the head from a wrecked 87 300SDL. I will sell this head bare for $800 or with the valves for $950 The valves and seats are ground and the head has had a light surface cut. For $1050, I will assemble the valves with new factory springs and seals. I wish I could guarantee this head but once it leaves my hands it is out of my control how the head is installed and used. I will provide a copy of the shop receipt showing the work that was done. Photos are available. Jim in Phoenix |
Bookmarks |
|
|