|
|
|
#1
|
|||
|
|||
in need of w123 front seat springs
springs must be in excellent condition. I have a bad back and cannot tolerate the lean......and SWMBO will not ride in car till they are fixed.
I have an 83 300D |
#2
|
||||
|
||||
Watch Ebay - there was one last week that went for $51 + shipping. A great deal considering retail price. A good upholstery shop may be able to refurb your existing seat also.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
|||
|
|||
can they replace the springs themselves?I can live with the covers but the spring itself is very weak on one side. As far as ebay, I have been watching. The seat I believe you are refering to was from a 500 series. There is a pair on now, and I contacted him. shipping would be something like $250........not doing that for seats he cannot (will not?) verify have good springs.
|
#4
|
||||
|
||||
A good upholster or mattress company could. Have you looked at this thread for some temporary relief?
http://www.peachparts.com/Wikka/W123SeatRepair
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#5
|
|||
|
|||
that looks like it may help....thanks! I can get rid of those nasty boards I have stuffed in there now
|
#6
|
||||
|
||||
The link is a good pictorial but you really don't have to remove the seat from car to do it. Do you know how to pull the bottom cover off?
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#7
|
|||
|
|||
no, but I have had the seats out to board up the springs
|
#8
|
|||
|
|||
what other seats will work in there?
|
#9
|
||||
|
||||
Jack - someone else will have to answer that. To remove the cover start on the back edge next to the door. Use a pair of needle nose start the cleat removal from track. After you get that started work by hand all the way around the seat. You don't have to do the rear cleat just flip it up to work on springs. After you do your repairs start where you finished working back around to the door.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#10
|
|||
|
|||
thanks
|
#11
|
||||
|
||||
I have both seats out of a 1983 300D. The driver seat has a tear in the seat about 5inches in length. Otherwise the springs seem to be in good condition.
__________________
1982 300D 1980 450SEL 6.9 1977 450SL |
#12
|
|||
|
|||
pm me a price please. thanks
__________________
81 Mercedes 300SD 289k.......SOLD 82 Mercedes 300CD 252k......slow ride 82 mercedes 300 SD...mi Unknown 83 Mercedes 300D ????ksniff..gone too 84 Mercedes 300D 148k........SOLD 85 Mercedes 300TD 386k and holding some one elses project |
#13
|
||||
|
||||
this works great
Quote:
__________________
'83 240D 264k on 100% biodiesel/ 31mpg 83 300D 217K the $800 gem '82 300D 267K the new WVO project car finished and driving for free International tractor B275 on B100 Ford 555 backhoe on B100 Sargent 25 ton Rough Terrain crane on B50 |
Bookmarks |
|
|