|
|
|
#1
|
|||
|
|||
82 300D or 240D parts
Im need a palomino rear seat back for an 82, 123. a good front seat bottom in palomino with no rips or holes, a good pair of sun visors that arnt falling apart inside also in palomino, a speedo cable for a 300D (the one with the square drive) a valve cover, 2/3 valve and the bracket it sits on for an 82 OM617 with auto trans, and i also need a good used tin oil pan for a 82 OM617, a transmissoin crossmember for a 300D and lastly I need not the hole drive shaft but just the front part that slips onto the driveshaft and bolts to the trans for a 300D
I have for sale a good used transmission for an 82 240D, a rear end with good cv shafts out of the same car for sale, I also have the drive shaft for this car, I have a speedo not the hole cluster just the speedo with I think 170K on it for the same car and a good working clock for the same car all parts are in good used condition, dont know the millage on this car the speedo was replaced due to a dash light melt down so I have no way of knowing but eveything does work drove the car onto the trailer to bring it home before the timing chain broke make me an offer on these parts or we can probably work out a trade I may need a few more parts as I get this car back together Last edited by Dewhite2485; 04-29-2007 at 11:23 PM. |
#2
|
||||
|
||||
i have the valve cover advertised here.
tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#3
|
||||
|
||||
Palamino?
Is that the tan or creamy color? : ) I'm sorry, I'm bad about the color thing. If it's the tan, I have a back seat and from seat set you can have if you pick it up. If it's the creamy color, I have only a few parts in my parts car, and I'm using the sun visors, but they're good. If you give me tan ones you can have my creamy color ones. They don't match the tan interior parts left, and I'm actuualy changing it over to a black interiror anyways. So I've got tan interior parts to spare.
|
#4
|
|||
|
|||
http://s151.photobucket.com/albums/s134/corvair64/
here are pics of the car to see if you have the same color, as for picking them up it would be a bit of a drive but would you be willing to ship ? thank you much |
#5
|
||||
|
||||
It's the same color, but I just sold them to a guy that stopped by my house. All I have left of that interior in decent shape is a passenger side front seat.
|
#6
|
|||
|
|||
I am in need of the passengers front seat would you mind getting some pic's and some prices for me and we can go from there
thank you very much |
#7
|
||||
|
||||
I have a back seat back and passenger front seat bottom. I think they are the correct color. Have pics, will need to use reg e-mail. r58m@hotmail.com Also have bracket and 2/3 valve on cam cover, auto with cruise control. Pics of that too. If you do not have cruise, you can use any cam (valve) cover, not the other way around...yes, I found out the hard way. There is a mounting point welded onto cover that you attach the cruise deal thing to.
__________________
83 SD 84 CD Last edited by toomany MBZ; 05-08-2007 at 06:05 AM. |
#8
|
||||
|
||||
I can take pics tomorrow. Can send better using regular email, not used to the forum yet. Email is votecoffee@yahoo.com I'm not sure the best way to ship it. What would you reccommend?
|
#9
|
|||
|
|||
Where are you located??????? I am in SW Indiana... Jim
Im need a palomino rear seat back for an 82, 123. a good front seat bottom in palomino with no rips or holes, a good pair of sun visors that arnt falling apart inside also in palomino, a speedo cable for a 300D (the one with the square drive) a valve cover, 2/3 valve and the bracket it sits on for an 82 OM617 with auto trans, and i also need a good used tin oil pan for a 82 OM617, a transmissoin crossmember for a 300D and lastly I need not the hole drive shaft but just the front part that slips onto the driveshaft and bolts to the trans for a 300D I have for sale a good used transmission for an 82 240D, a rear end with good cv shafts out of the same car for sale, I also have the drive shaft for this car, I have a speedo not the hole cluster just the speedo with I think 170K on it for the same car and a good working clock for the same car all parts are in good used condition, dont know the millage on this car the speedo was replaced due to a dash light melt down so I have no way of knowing but eveything does work drove the car onto the trailer to bring it home before the timing chain broke make me an offer on these parts or we can probably work out a trade I may need a few more parts as I get this car back together[/QUOTE]
__________________
James A. Harris |
#10
|
||||
|
||||
My location?
I'm located 20 min south of franklin, va. It's a far ways away from indiana.
|
#11
|
||||
|
||||
ToomanyMBZ: What do you have as far as parts cars and also do you have any cars for saloe? I'm probably not too too far from you, not in comparison to most on this forum. I may also go your way in going to see my brother which I'll be doing soon anyways (his wife and he are having their first baby) who lives up in northeast va. email me at votecoffee@yahoo.com if you want.
|
Bookmarks |
|
|