Gentlemen,

On the inner firewall above the heater box there is a metal bracket that carries the fresh air door vacuum actuators and the linkage from the actuators to the fresh air door.

I need the linkage consisting of the white bell crank and black link. While doing the evaporator replacement I discovered that the bell crank arm to the air door is broken.

Parts are not available from Dealer.

I will take the entire bracket/actuator/linkage assembly.


Thanks,

Wray Stanley

PM with two pics to be forwarded from Jfreezn@aol.com

trying to attach two pics now. It worked! the forum administrator says that my PM bounced so let's go with this. I marked the part 87 300SDL but it could still be interchangable. I will sell all in the picture for $25, plus shipping. These are a two stage actuator and vacuum placed on the back ports gets full travel and holds. Vacuum placed on the center port leaks down and one of the two bellows is leaking. plugging the bad one holds vacuum on the good one but both actuators are needed to get some travel. You can probably make one good one out of yours and mine. For $40, I will put one of my new spare bellows in the bad chamber. Your call!

Jim in Phoenix

Attached Thumbnails