WTB: om617 IP top plate
Let me explain...
I decided to try to remove the ALDA on my '85 300td and in the process RIPPED the plate on top of the IP that the ALDA is connected to. I need a new one. I am still driving it since it does not seem to leak fuel.. but I need a new one. Thanks |
Injection Pump
Contact me via email (jimh16671836@yahoo.com) with your location for shipping costs and I will price the IP for a 300D Turbo... Jim
|
I see that I was not very specific... story of my life.
All I need/want is the top plate that screws to the top of the IP. This plate is what the ALDA attaches to. I assume I can unscrew the four screws and pull the plate off, ALDA and all. But it does occur to me that the ALDA has to push/make contact with something in the IP.... so that plate may have a magic rod that is attached deep deep in the bowels of the IP. I decided to park the TD and got my dead grandmothers Cadillac out of storage... Good ole 5.7 V8 put the poor TD to shame :cool:. If I had the TD handy I would try to pull the plate off. Anyway... hope this helps |
top plate on IJP for alda
Hey if you striped the holes out on the alda plate just run a tap in it and repair the threads, just a thought.
|
All times are GMT -4. The time now is 12:19 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website