|
|
|
|
|
#1
01-31-2010, 04:05 PM
|
||||
|
||||
|
WTB: om617 IP top plate
Let me explain...
I decided to try to remove the ALDA on my '85 300td and in the process RIPPED the plate on top of the IP that the ALDA is connected to. I need a new one. I am still driving it since it does not seem to leak fuel.. but I need a new one. Thanks
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D 
|
|
#2
01-31-2010, 08:01 PM
|
|||
|
|||
|
Injection Pump
Contact me via email (jimh16671836@yahoo.com) with your location for shipping costs and I will price the IP for a 300D Turbo... Jim
__________________
James A. Harris
|
|
#3
01-31-2010, 08:48 PM
|
||||
|
||||
|
I see that I was not very specific... story of my life.
All I need/want is the top plate that screws to the top of the IP. This plate is what the ALDA attaches to. I assume I can unscrew the four screws and pull the plate off, ALDA and all. But it does occur to me that the ALDA has to push/make contact with something in the IP.... so that plate may have a magic rod that is attached deep deep in the bowels of the IP. I decided to park the TD and got my dead grandmothers Cadillac out of storage... Good ole 5.7 V8 put the poor TD to shame  . If I had the TD handy I would try to pull the plate off.Anyway... hope this helps
__________________
08 R320 CDI current Past 95 E420 87 300D Turbo 5spd 90 300TE 83 300SD 85 300TD 92 400E 85 190D Last edited by ashedd; 01-31-2010 at 08:55 PM. Reason: me no speak inglis
|
|
#4
02-01-2010, 07:40 PM
|
||||
|
||||
|
top plate on IJP for alda
Hey if you striped the holes out on the alda plate just run a tap in it and repair the threads, just a thought.
|
 |
| Bookmarks |
|
|
Linear Mode
