|
|
|
#1
|
|||
|
|||
W124 W126 15" ET48 6.5 Rim w/ or w/o tire (sale)
The rim has never been mounted / used.
This is not the actual rim in the photo. Bought this for my W201, but it is not intended for it, it has a different thickness and would require different bolts. Photos by request. I can send a center cap with it, but it will not do the rim justice.... it is almost perfect. Standard factory balancing weights and no markings. 2 small scratches right near the hole for the center cap. I think I can ship it for $80 without the tire. With the new tire that is on it currently, it will be more expensive. |
#2
|
||||
|
||||
The ET48 wheel is 1990-1993 124 chassis.
__________________
Gone to the dark side - Jeff |
#3
|
|||
|
|||
So, it wasn't used on the w126?
{I am starting to think you just like correcting me..... } This wheel is like a curse. I had no idea there were so many variations of the same rim. I bought it because of the beautiful Pirelli on it not knowing the ET was different until I tried to install it. I took this style in 15" off of a w124 and put them on my w201 all around... those must have been from 86-89? Then what is the size that the w126 uses? |
#4
|
|||
|
|||
This wheel is not for W126.
w126 uses et 25 on a 15". I am not reposting this again, though. Thank you for the corrections. |
#5
|
||||
|
||||
No, I've just had too many 201/124/126 wheels myself, just trying to help.
FWIW, it will fit all 124s up through '93 that came with the 15-hole wheels. It will also IIRC fit all 201 cars, so there is a pretty wide fittment. Also, it is an Audi bolt-circle, and a VW Vanagon, although the center-bore might need to be changed for the VW/Audi fits.
__________________
Gone to the dark side - Jeff |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|