FS: OM617 Turbo Engine Parts- from 85 300D- Middle TN - PeachParts Mercedes-Benz Forum

DieselClan · #1 08-27-2012, 01:28 AM

I have several parts left from an engine swap on a 1985 Mercedes 300D with the OM617 Turbo diesel motor. Prices were just made randomly and I will accept offers. Parts are freshly pulled and haven't been cleaned much. I have more than what's listed, but these are just what's been pulled.

Pulled Parts:
-Alternator Bracket: $50.00
-Thermostat housing: $30.00
-Hard metal Injector lines (5 total): $40.00 complete assembly
-Flywheel with Flexplate and bolts: $90.00
-Radiator fan blade w/ fan clutch: $75.00
-Motor Mounts (used but good spares or cheap replacements): $10.00/pair
-Air Filter Housing Mounting bracket (good shape, has a weld mark): $15.00---SOLD---
-Throttle Linkages (2 of them): $20.00/pair
-Turbo Charger w/Exhaust Manifold (still attached). Turbo worked fine: $175.00
-A/C suction hose: $45.00
-Injection Pump: $150.00---SOLD---
-Oil Filter Housing: $50.00
-Alternator: $40.00
-Vacuum Pump (has slight scoring but operated fine on car): $50.00

Parts Not Pulled yet:
-Valve Cover
-Fuel Injectors
-OR-

I have the rest of the engine (block, head etc...) available as parts or whatever you wish, say $75.00?

Pics are at the link below. Not everything has been pictured yet and may be another week before I get everything sorted and cleaned for pictures.

Shipping available or local pickup preferred and ideal!

Cash (local pickup) or PayPal accepted.

Reasonable offers are welcome.

Pictures: OM617Parts pictures by daimlerdiesel300d - Photobucket

Zacharias · #2 08-27-2012, 02:40 PM

Thanks

DieselClan · #3 08-27-2012, 04:12 PM

Quote:

Originally Posted by Zacharias

Thanks

Replied.

Also added an alternator and vacuum pump to the list.

canucker · #4 08-29-2012, 04:49 PM

any engine shock absorbers, with the mounting plate?

E150GT · #5 08-29-2012, 11:40 PM

which fan blade is it? The 9 blade plastic one?

DieselClan · #6 08-30-2012, 03:46 AM

Quote:

Originally Posted by canucker

any engine shock absorbers, with the mounting plate?

I'll have to get back to you on those. I ended up putting new absorbers on the replacement motor but picked out the best mounts I had. I believe my mechanic ended up destoying the old absorbers.

DieselClan · #7 08-30-2012, 03:51 AM

Quote:

Originally Posted by E150GT

which fan blade is it? The 9 blade plastic one?

Yes, it's the 9 blade plastic one. This one below:

DieselClan · #8 09-03-2012, 03:29 PM

Air cleaner bracket and IP are SOLD
9/4/12: Vacuum pump SOLD

DieselClan · #9 09-10-2012, 01:25 AM

Fan blade/clutch SOLD.

More parts available:

-Left and Right side Motor Mount Arms/Brackets (L: 1152231704 / R: 6172234004): $35.00 each or $60.00 for both

-Lower Alternator Bracket (6171550535): $35.00-----SOLD-----

-Power Steering Pump Bracket (6172360330): $30.00

-A/C Compressor Bracket (6171310135): $35.00

....more to come....

Make offers. These parts aren't doing any good sitting in my garage!! Pics added to the link above.

MaineCedes · #10 09-10-2012, 04:13 AM

Would you have the air filter housing??

DieselClan · #11 09-10-2012, 12:14 PM

Hi. Sorry, that's one of the parts I had to reuse on the swap.

Quote:

Originally Posted by MaineCedes

Would you have the air filter housing??

DieselClan · #12 09-18-2012, 10:40 PM

(5) Injectors and Alternator adjustment bracket are SOLD.

More parts in pics below. Also, have cyl head/camshaft unit as one whole available for $125.00 (local pickup only!).

Items in pics below just make reasonable offers. Have oil cooler lines, oil tube, pulley/balancer as entire unit.

perazzitm · #13 09-21-2012, 09:58 AM

I wanted to know if you had any pistons and what you wanted for them.

DieselClan · #14 09-25-2012, 04:28 PM

I replied to you via PM a few days ago. And yes, I do have the pistons, which are usable- they show slight scoring on a couple but my mechanic said they are suitable replacements. He would recommend replacing the ring set on all of them as P.M. though. Just make a reasonable offer.

I also have the crank available. $100.00 obo + shipping

Make offers on what you see. I don't really want these items sitting in my garage for eons! Anyone who can pick items up locally would be much appreciated and would make deals for them.

Quote:

Originally Posted by perazzitm

I wanted to know if you had any pistons and what you wanted for them.

DieselClan · #15 11-29-2012, 03:36 AM

I have these parts left:

-Turbo w/exhaust manifold
-Left & Right Motor Mount arms
-Upper oil pan (needs de-greasing) w/ dipstick tube
-Water pump pulley
-Valve Cover
-Oil Filter Housing

If anyone near by would like to take everything at once and get this stuff out of my garage I would take $225.00 for all of it. This is local pick-up only! While I could ship most of it, I will not ship the oil pan- it's too mucky and the dipstick tube still attached is not very package friendly. Please inquire if interested.