WTB: W124 ZF Power Steering Pump
 

Need this for my '91 300D 2.5t. Apparently the Vickers pump on the 300E/TE models have different hose fitting thread. So this has to come from a W124 diesel (OM602/OM603) which have the ZF pump.

Tan
'87 190Dt.
'87 300TDT
'91 300D 2.5

I have one off a 603 (W124) what are the numbers in your pump to compare

Here are the numbers off the data plate:
Type 7682900109
1507480 (serial #?) 12.90 (assuming the date of manufacture)
124 460 02 80 (MB part no)

How many miles on yours and any shaft play?

Thanks,
Tan

This are the numbers off my pump 124 460 06 80 as you can one number is different no shaft play mileage is around 150 K

I checked again mine is 124 460 02 80, yes one number different from yours. Will check EPC to see if 06 80 will fit. What are the wrench sizes of the hose fittings at supply and return ports of the pump? The return line fitting takes 17mm and supply takes 19 mm on mine. Thanks.

Could not find 124 460 06 80 in EPC. Can you double check the number? Thanks.

I did double check an it's 124 460 06 80 tomorrow I'll check the size of the fittings I think they are 17 and 19 but I'm not sure

The wrench sizes are the same 19mm and 17mm I have a 603 engine and this pump fits. It should fit your car