I need a replacement metal hard line that runs from the transmission forward towards the radiator. I need the one located on the passenger/right hand side of the car. It needs to be free of chaffing or other damage from the brackets (which is what causes failure usually). I will source new clips and buffer from the dealer, so I just need the line itself.

Let me know what you have. Thank you very much.

__________________
1979 300D 040 Black on Black - 1985 300D Maaco job (sadly sprayed over 199 Black Pearl Metallic) on Palamino

http://i.imgur.com/LslW733.jpg

The Baja Arizona Oil Burners Send a message if you'd like to join the fun
Left to Right - UberWasser, Iridium, Stuttgart-->Seattle,, mannys9130

Visit the W123 page on iFixit for over 70 helpful DIY guides!

Still looking.

__________________
1979 300D 040 Black on Black - 1985 300D Maaco job (sadly sprayed over 199 Black Pearl Metallic) on Palamino

http://i.imgur.com/LslW733.jpg

The Baja Arizona Oil Burners Send a message if you'd like to join the fun
Left to Right - UberWasser, Iridium, Stuttgart-->Seattle,, mannys9130

Visit the W123 page on iFixit for over 70 helpful DIY guides!

Will one from an OM617 W126 work?

I'm not sure, however I have a purchase pending with another forum member at this time, so I think this issue is resolved thanks for taking the time to post though.

__________________
1979 300D 040 Black on Black - 1985 300D Maaco job (sadly sprayed over 199 Black Pearl Metallic) on Palamino

http://i.imgur.com/LslW733.jpg

The Baja Arizona Oil Burners Send a message if you'd like to join the fun
Left to Right - UberWasser, Iridium, Stuttgart-->Seattle,, mannys9130

Visit the W123 page on iFixit for over 70 helpful DIY guides!

The shape is different. The w123 lines end up parallel to the lower pan, while the w126 lines go above the lower pan.

But with that said, it may work provided you use the longer w126 rubber line.

__________________
1983 123.133 California
- GreaseCar Veg System