Seeking a 190E manual driveshaft. I really only need the front part, unless you are not willing to separate.
Thank you for looking.

__________________
Irony.cc

You should probably talk about spline count and yoke bcd.

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

I have the front half from a 190e/190D (8 valve motor). If you're converting a w201 this should work, if you're converting a w124 it might work but would be a tight fit. The flex discs are also small for a W124.

__________________
'98 E300 Turbo "Juliette"
'85 Federal 300TD

Sorry, still new to these cars. I bought a 717.412 transmission, which I was told uses the 'larger' yoke. I will have to research which spline count that is.

__________________
Irony.cc

He is talking about the spline count between the driveshaft halves.

What car are you converting to 5spd?

__________________
'98 E300 Turbo "Juliette"
'85 Federal 300TD

Hmm, did not even realize those can come in different spline sizes. The car is a 1993 190E 2.6.

__________________
Irony.cc

W201's have a 25 tooth spline? -w124 260E uses same size so I think the 2.6 W201 is the same.

The driveshaft I have I think will mate to your rear half, but the flex disc will be the smaller size from a 2.2 190D/2.3 8v 190E. The 2.6 w201's used the larger flex disc (guibo) that is the same size as the gas w124's if I remember right.

__________________
'98 E300 Turbo "Juliette"
'85 Federal 300TD

I have a complete 190e 2.3 5 speed drive shaft.
The question is, will it fit your transmission?
Capflya bring up a good question.

QUOTE=capflya;3445579]W201's have a 25 tooth spline? -w124 260E uses same size so I think the 2.6 W201 is the same.

The driveshaft I have I think will mate to your rear half, but the flex disc will be the smaller size from a 2.2 190D/2.3 8v 190E. The 2.6 w201's used the larger flex disc (guibo) that is the same size as the gas w124's if I remember right.[/QUOTE]