WTB: Cruise Control Components, W123 (Wiring Harness, Linkages)
 

Hi All,

I'm trying to help the owner of an excellent condition OM617+5 speed equipped 240D install a cruise control system.

We've opted to go with the 14-pin system found in the later model W123's.

I have a good amount of components but here is what I need:


1) Speedometer Sensor
2) Plate that goes on top of the power steering bracket
3) Cruise control harness, from actuator connector in engine bay, to amp connector in cabin.
4) Linkage piece and assembly that connects to the actuator:

http://i.imgur.com/YkNCWrN.jpg

I have an actuator, an amplifier, and a stalk.

Let me know what you have... or if you have any questions please feel free to ask!

I have an 82 that I'm parting pieces from that had this type of setup. I do not know for sure if it worked as I think my amplifier was blown. Let me look this weekend and I'll see if I have them still. I know I have the wiring harness as I removed the entire wiring harness from the car including the fuse box. (That took some work!)

We can get you what you need at TPS Benz Restorations. Give our used parts specialist, John Redmon, a call at 903.858.1128. If you can not get through on the phone you can email tfrentz@hotmail with your info.