WTB: W124 suspension !!
 

What's up I'm kinda knew to these body styles and I'm looking to drop my 300. Is anyone selling a suspension set up or if someone can tag sites I can purchase suspension from (coilovers, cup kits, ect.) would be dope. Thanks in advance .


Sent from my iPhone using Tapatalk

Yellow speed racing makes excellent coilovers (not really coils, but the only way to properly set up the car). I forgot where I bought them to be honest. I had them on my drift car.

Or check ebay/amazon for good deals on eibach/h&r/vogtland or b&g springs

I've heard of ppl using e36 coilovers has anyone else here had experience with that?


Sent from my iPhone using Tapatalk

Bump


Sent from my iPhone using Tapatalk

If you want to be a cheap ass and ruin the suspension geometry, sure - go for it. Have fun blowing out your strut towers.

Ok that doesn't help me at all


Sent from my iPhone using Tapatalk

Really now? I figured that was fairly self explanatory... as it's saying to not do E36 crap as it introduces a change in suspension geometry and overloads the strut towers.

If you want to be a stance stance dork and do that, fine.

Or just totally ignore everything I've mentioned before and head over to stance works were they'll suck on your toes and direct you to throw some janky Racelands on your car.




Sent from my toilet paper phone because it's a piece of shi....

I do want to lower the car n give it a nice stance but I'm also about doing things the right way I've heard the e36 stuff and I'm tring to expand my knowledge and find better options. But thanks for ur impute


Sent from my iPhone using Tapatalk

I've also found coilovers on gecko, CATuned, and yellow DPS. Anyone have feed back on any of these coilovers ?


Sent from my iPhone using Tapatalk

Not exotic but what worked for me was H+R lowering springs, Bilstein Sport shocks and struts, Sportline swaybars. Not an incredibility stiff ride but cornered like it was on rails. Need to be careful with cans, box turtles, etc. as it had about 4" of clearance at the crossmember. I miss that setup so I'm doing it again with a 95 E320.

Thanks for the input


Sent from my iPhone using Tapatalk