WTB: dogleg + flywheel + shifter assembly

[mike-81-240d]

I'm going to be picking up a OM602 for my W123, and I am now searching for a getrag cosworth dogleg gearbox with shifter, rods, flywheel, and maybe the crossmember. I don't need the clutch kit as I'll be going upgraded, and I probably don't need the driveshaft as it'll more than likely be incorrect due to uncharted waters.

Might also consider a nice low mileage grind free overdrive 5 speed out of a 2.6 190 or a 300E.

Thanks,
Mike

[blackmerc]

i have 4-speed box + drive shaft if you need it

[mike-81-240d]

I already have a 4 speed behind my current OM617.952 that is getting the boot. Looking for the modern bellhousing 5 speeds for OM60X, M10X, etc.

[gatorblue92]

Someone posted one recently on the MB Parts for sale and trade Facebook page. It included the whole car (300E) and it was located somewhere in PA IIRC.

[merckrest]

Ive been looking for the same parts. I actually am in contact with a guy who has 2 and another guy who has one. But seems everyone is just too busy to actually package stuff up and send it. Im nearing 2 weeks now waiting on one to be packed up. No clue what is up with people posting stuff for sale and then not sending them or anything. So good luck....

[t walgamuth]

I have a shifter for the 190 five speed, I believe.

[mike-81-240d]

At that point I might as well buy one of the two junker 190D's local to me with 5 speeds and strip the goods.

I just really want the durable getrag cosworth dogleg so I don't have to worry about shredding transmissions.

[gatorblue92]

Unless you are going full on STD I would think the 717.411 would work just fine behind a 602.

[mike-81-240d]

I'm going with a 7.5mm meken pump, and a HX35W so I'd probably need the 717.430 or the .404

[winmutt]

I've got the 430 or 431, it's probably worth just getting the x5 trans, thats my next step.