Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Classified Ads > Mercedes-Benz Used Parts For Sale & Wanted

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-03-2018, 05:03 PM
David Hendy's Avatar
Registered User
 
Join Date: Jun 1999
Location: New Milford, Ct
Posts: 1,091
W124 3.6 AMG swap 93-95 E320 300E 300CE 300TE

I have a full 3.6 swap from one of my cars that was in an accident.

This is a bolt into any of the 93-95 M104 W124 cars, with ZERO modification

Its a 3.6 C36 AMG engine ready to bolt into a W124

Comes complete, ready to go. Included is a W124 valve cover, W124 replacement engine harness, W124 a/c compressor and a/c hose. W124 alternator & alternator harness, W124 smog pump. W124 engine mounts.

It comes with a W124 M104 Ecu with a C36 stage 2 chip in it. It works, and I've used it.

Block and head are stamped with AMG or HWA part numbers

You will need to switch over your current thottle body, either ASR or Non ASR. Both will work fine.

If you have a wagon, you will need to swap over your tandem steering pump. Currently the engine has as sedan/coupe/cabrio steering pump

Head gasket has been done and has zero head leaks

If you can run an err "test pipe" instead of a cat this is close to a 290hp swap

You can swap this into an earlier W124 or a 190E but it will need more work and harnesses. Which I have.

$2500

Attached Thumbnails
W124 3.6 AMG swap 93-95 E320 300E 300CE 300TE-e36engine.jpg   W124 3.6 AMG swap 93-95 E320 300E 300CE 300TE-e36engine5.jpg   W124 3.6 AMG swap 93-95 E320 300E 300CE 300TE-20180326_100658_resized.jpg  
__________________
David Hendy
'97 Renntech E60RS
'97 GMC 2500 Sub' Diesel
'95 E300D
'88 300TE
'88 250TD
'84 L/Rover 109
Reply With Quote
  #2  
Old 04-04-2018, 01:58 PM
Registered User
 
Join Date: Dec 2002
Location: New Castle County, DE
Posts: 1,080
A siren you are being (with apologies to Jason and the Argonauts) by offering something easily doable, more power, more fun, etc. I intend to resist. GLWS.
__________________
Hanno
'79 6.9 Sold (after 27 years)
'83 280SL, 5 spd.
'94 E320 Sdn. 5 spd conversion
'02 E320 Sdn.(on loan to mom!)
'87 300E (5 spd. conversion) Sold
'05 E500 Wagon
Reply With Quote
  #3  
Old 04-07-2018, 06:53 PM
Registered User
 
Join Date: Oct 2009
Location: Hermitage, TN
Posts: 201
Must resist

I just located an 85 190D with a bad motor and a five speed!! Man, would this be great in that car...
__________________
John Breslin
93 500E, 92 500E, 86 190E 16V, 62 220SEb
Music City Chapter MBCA
Reply With Quote
  #4  
Old 04-08-2018, 05:16 PM
Registered User
 
Join Date: Nov 2013
Location: Eugene OR
Posts: 93
I'm working on swapping a 3.6 into my '95 wagon and wondering where can I get the stage 2 chip from. Or can do use the ecu from a '95 C36?


Sent from my iPhone using Tapatalk
Reply With Quote
  #5  
Old 04-12-2018, 01:30 AM
Registered User
 
Join Date: Jul 2011
Posts: 395
Chip

There is a place that can take your existing ECU and chip it.
Quote:
Originally Posted by benzevo124 View Post
I'm working on swapping a 3.6 into my '95 wagon and wondering where can I get the stage 2 chip from. Or can do use the ecu from a '95 C36?


Sent from my iPhone using Tapatalk
Reply With Quote
  #6  
Old 04-12-2018, 01:31 AM
Registered User
 
Join Date: Jul 2011
Posts: 395
David,
Have you swapped a C36 engine into a 190e or earlier 300e before?
Quote:
Originally Posted by David Hendy View Post
I have a full 3.6 swap from one of my cars that was in an accident.

This is a bolt into any of the 93-95 M104 W124 cars, with ZERO modification

Its a 3.6 C36 AMG engine ready to bolt into a W124

Comes complete, ready to go. Included is a W124 valve cover, W124 replacement engine harness, W124 a/c compressor and a/c hose. W124 alternator & alternator harness, W124 smog pump. W124 engine mounts.

It comes with a W124 M104 Ecu with a C36 stage 2 chip in it. It works, and I've used it.

Block and head are stamped with AMG or HWA part numbers

You will need to switch over your current thottle body, either ASR or Non ASR. Both will work fine.

If you have a wagon, you will need to swap over your tandem steering pump. Currently the engine has as sedan/coupe/cabrio steering pump

Head gasket has been done and has zero head leaks

If you can run an err "test pipe" instead of a cat this is close to a 290hp swap

You can swap this into an earlier W124 or a 190E but it will need more work and harnesses. Which I have.

$2500
Reply With Quote
  #7  
Old 04-12-2018, 01:45 AM
Registered User
 
Join Date: Nov 2013
Location: Eugene OR
Posts: 93
Quote:
Originally Posted by Stevester 500E View Post
There is a place that can take your existing ECU and chip it.


I know there is a place but where is it and how do I find them? Was it Speed Tuning USA?


Sent from my iPhone using Tapatalk
Reply With Quote
  #8  
Old 04-30-2018, 10:27 AM
t walgamuth's Avatar
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 38,626
Quote:
Originally Posted by David Hendy View Post
I have a full 3.6 swap from one of my cars that was in an accident.

This is a bolt into any of the 93-95 M104 W124 cars, with ZERO modification

Its a 3.6 C36 AMG engine ready to bolt into a W124

Comes complete, ready to go. Included is a W124 valve cover, W124 replacement engine harness, W124 a/c compressor and a/c hose. W124 alternator & alternator harness, W124 smog pump. W124 engine mounts.

It comes with a W124 M104 Ecu with a C36 stage 2 chip in it. It works, and I've used it.

Block and head are stamped with AMG or HWA part numbers

You will need to switch over your current thottle body, either ASR or Non ASR. Both will work fine.

If you have a wagon, you will need to swap over your tandem steering pump. Currently the engine has as sedan/coupe/cabrio steering pump

Head gasket has been done and has zero head leaks

If you can run an err "test pipe" instead of a cat this is close to a 290hp swap

You can swap this into an earlier W124 or a 190E but it will need more work and harnesses. Which I have.

$2500
How many miles does it have on it? Do you have the tranny too?
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.
Reply With Quote
  #9  
Old 05-01-2018, 07:44 AM
David Hendy's Avatar
Registered User
 
Join Date: Jun 1999
Location: New Milford, Ct
Posts: 1,091
Engine has been sold

__________________
David Hendy
'97 Renntech E60RS
'97 GMC 2500 Sub' Diesel
'95 E300D
'88 300TE
'88 250TD
'84 L/Rover 109
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page