|
|
|
#1
|
|||
|
|||
600SL BIG BRAKES 124-129 (201?)upgrade
I'm selling a set of 600 SL front brake calipers. These bad boys work with the directional 600SL 320mm rotors for massive braking power. They are a direct bolt on for 124 cars with the 4 piston 294 or 295mm brakes, you don't even have to trim the dust shield. Other 124s may need to trim the dust shield, but otherwise bolt in. SL 320 and SL 500 cars can also bolt these in for an upgrade. As far as I'm aware they also bolt into the 201 cars.
These are just the calipers, the rotors are not included. You'll need to purchase the 600SL 320mm directional rotors for installation. Unlike most AMG big brake setups, those rotors are not ungodly expensive, but quite reasonable. Plus they have directional venting...pretty freakin' cool. Bang for buck these are an amazing upgrade. You will need at least 16" wheels with appropriate ET to clear these big boys. The only, and I mean only, reason I'm selling is because they don't come close to clearing the deep dish 17"s I have on the '90 CE and those 803s look soooo damn good. Asking 300$ plus actual shipping.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#2
|
|||
|
|||
Quote:
Sent from my SM-G955U using Tapatalk |
#3
|
|||
|
|||
Quote:
Usually depends on the location of the drop center of the wheel. Low enough offset with a drop center far enough (towards the outside) from the caliper and anything could clear it. Every wheel is different. Sent from my iPhone using Tapatalk
__________________
Past mb: '73 450sl, '81 280slc stick, '71 250, '72 250c, '70 250c, '79 280sl, '73 450sl, parted: '75 240d stick, '69 280s, '73 450slc, '72 450sl, |
#4
|
|||
|
|||
OE wheels on the SL 600 that these came off were 16"
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#5
|
|||
|
|||
Bump. These bad mama-jamas are still for sale.
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
#6
|
|||
|
|||
Where are you located?
__________________
1993 e300 1995 e320 1994 e320 2006 s500 4matic 2004 Jeep wj overland 2001 Ducati 748 2004 Honda shadow aero |
#7
|
|||
|
|||
Denver area
__________________
90 300TE 4-M Turbo 103, T3/T04E 50 trim T04B cover .60 AR Stage 3 turbine .63 AR A2W I/C, 40 LB/HR MS2E, 60-2 Direct Coil Control 3" Exh, AEM W/B O2 Underdrive Alt. and P/S Pulleys, Vented Rear Discs, .034 Booster. 3.07 diffs 1st Gear Start 90 300CE 104.980 Milled & ported head, 10.3:1 compression 197° intake cam w/20° advancer Tuned CIS ECU 4° ignition advance PCS TCM2000, built 722.6 600W networked suction fan Sportline sway bars V8 rear subframe, Quaife ATB 3.06 diff |
Bookmarks |
|
|