W123 Manual Transmission Parts and Working Glove Box Door
 

For sale I have;

- 1 Manual transmission from a 1983 240D (716.210) $325
- 1 Manual transmission crossmember from a 1983 240D $50
- 1 Clutch and brake pedal from a 1983 240D $75
- 1 Black glove box with working spring on the slider. $45

Parts are located in central NC for local pickup.
I'm willing to ship parts at the buyer's expense.
I'm open to offers so long as they are reasonable.



The transmission was removed from a 1983 240D with 190,000 miles on the dash, but I suspect a gauge cluster swap so the mileage is really unknown. Feels very similar to another transmission I have with 220,000 miles on it. Shifts well on the ground. Haven't tested in a car. Release arm has a hole where slave cylinder pushes. Looks repairable with a welder. Will be included with transmission. Also included is the slave cylinder, though I would replace, and the line that runs over the top of the transmission.

https://i.imgur.com/kwS07YS.jpg?1

https://i.imgur.com/njUNkEL.jpg?1

https://i.imgur.com/H4AUBgR.jpg?1

https://i.imgur.com/I6AN9oa.jpg?1

https://i.imgur.com/EZZO1DP.jpg?1

https://i.imgur.com/2htmF14.jpg?1

https://i.imgur.com/jzLI2OY.jpg?1

Transmission crossmember is in good shape, albeit a bit dirty. Not bent, rusted, or otherwise damaged. Comes with transmission mount, although I would recommend replacing it.

https://i.imgur.com/H9L6otv.jpg?1

Clutch and brake pedal were removed from a 1983 240D. Clutch pedal is missing rubber pad, and brake pedal pad is worn. Both pivot smoothly. Clutch master cylinder has small plastic feed line fitting included. I would suggest replacing the master cylinder. One switch that is mounted above the clutch pedal is broken. It is rusty and was damaged when removing the pedals from the car.

https://i.imgur.com/hQa4xdd.jpg?1

https://i.imgur.com/CCVTXUW.jpg?1

https://i.imgur.com/HeKqADG.jpg?1

https://i.imgur.com/nyHpXrV.jpg?1

Glovebox Has excellent outer plastic, however the wood is missing a piece of the finish. The spring that returns the slider to the center is still working very well. The interior plastic is also in good shape and doesn't seem to be brittle. Will come with the slotted nots used to secure door to hinges.

https://i.imgur.com/2MBYYUN.jpg?1

https://i.imgur.com/tOSiZsE.jpg?1

Bump.

Send me an offer on anything. I am willing to ship.

Saved for later.

Would this fit 83 300d?

hi there, im interested in the pedals, crossmember and yoke. do you still have? thanks