Anyone have one to sell?

Thanks

I am trying to replace the fan clutch on my 1987 Mercedes 300D so this would be a big help.

For similar cost to the Baum pulley holder tool, you can have all three of these tools. You'll have the fan/clutch/shroud out in 5 minutes or less.

1. Generic pulley holder: Performance Tool W87023, available on Ama**n.

2. Cheap flex head ratchet:
https://www.harborfreight.com/14-in-38-in-drive-long-reach-dual-flex-head-ratchet-67994.html

3. Slim hex socket (I think fan clutch bolt is 8 mm).

https://www.amazon.com/ARES-70497-9-Piece-Metric-Impact-Driver/dp/B07B3XZQ5Z/ref=sr_1_2?dchild=1&keywords=ares+impact+hex&qid=1591991426&sr=8-2

It's pretty simple when you get down to it. I recommend using an OM606 or M103 fan clutch if your jaw hits the floor when you see OEM OM603 fan clutch prices.

__________________
1983 300D Midnight Blue
4 speed, W115 intake mani, non-EGR exhaust mani, KKK K26, 3 pc Euro bumpers, Lo-spec Euro headlights, AL129X, hubcaps, custom A/C

1987 300TD Smoke Silver
Euro headlights, thermostat relocation, coolant bypass mod, rebuilt Becker + Jehnert + Helix audio, OEM Oris roof boxes and surfboard racks, Euro towbar

1983 300TD Reed (Moss) Green / Dark Olive MB Tex Euro spec

1983 300TD Silver Blue / Blue cloth Euro spec, OM648 and 722.6, 15" hubcaps, W126 S2 brakes

Thanks! The 606 clutch was higher than 603 and both were around $300 so I opted for Bosch at $80. Hoping it was made in Germany.