As pictured, four matched, German Stuttgart coded injectors 060. KCA 30 SD 27/4 These are the older style of nozzle holders.
The injectors have USED German Bosch "2nd" generation nozzles 240/. I say 2nd gen. because the markings went from being stamped to laser etched, so the nozzles are newer and were a replacement somewhere along the line (these nozzles did not originally come with this injector set). I do have nice used German Bosch 240 but no slash. The latter was generally used with NA applications and sprayed around 15% less fuel. I can swap in a set of no slash nozzles if you want, but I suggest going with the tiny smidge of extra fuel since the 40+ old engines probably will need it and it won't be noticed for the most part other than you may have some better fuel economy, but again a 40+ engine is what it is.
The set has my service, and they are pop tested at 1,675 +/- 25 PSI. There is no peeing, no split cone patterns, and overall very nice used German nozzles. The nozzles should have around 35-50K left in them.
The nozzle holders are yours. Kit includes a rebuilt OFV with my mod'd spring. You will need to re-use your aluminum crush washers. Also included is four (4) 10.00mm orifice heat shields and one meter of 3.2mm braided fuel line.
$180 Shipped CONUS with $200 worth of insurance, USPS Priority Mail. That's around $50 savings off the individual price elements.
PM if interested.
06-26-2021, 07:20 AM
Linear Mode
