|
|
|
#1
|
||||
|
||||
Anybody Recognize These Wheels?
A friend of mine has some MBZ wheels that he's looking to sell for $400 (for 4), but I don't recognize them. I have an 84 300TD Wagon that I'm looking to put them on, but I want to be sure that they will fit before I get serious. Also, he says that he's 99% sure that they're 16" wheels.
Also, $400 seems pricey. Anybody agree?
__________________
84 300td (Yes, a wagon) "The Golden Dragon" 195k, 2nd owner Lives in Redmond, WA |
#2
|
||||
|
||||
They might have an MB bolt pattern and hub diameter but those aren't OE MB wheels.
Ask your friend if there are any markings on the back that provide width, diameter and offset. On MB wheels this information is stated something like 7J16H2 ET25 where 7 is the width, 16 is the tire diameter and 25mm is the offset. Also compare the hub diameter, the hole though the center of the wheel, at the mounting face (ignore any chamfer) with the corresponding flange on your car. It should be a snug fit. Sixto 87 300D |
#3
|
||||
|
||||
Great. Going to look at them tonight. Last thing I want to do is get stuck with some wheels that don't work.
I'll post markings tonight after I've seen them.
__________________
84 300td (Yes, a wagon) "The Golden Dragon" 195k, 2nd owner Lives in Redmond, WA |
#4
|
||||
|
||||
centra knock offs?
|
#5
|
||||
|
||||
Looks like the same ones Swayze had on his SEC in Roadhouse:
__________________
1985 500SL Euro w/ AMG bits 130k 1984 300SD Turbodiesel 192k 1980 240D Stick China 188k 2001 CLK55 AMG 101k 2007 S600 Biturbo 149k Overheated Project, IT'S ALIVE!!! |
#6
|
||||
|
||||
This comment is not fair
This is bellow the belt Tyler I am sure you know what I am talking about
__________________
http://i680.photobucket.com/albums/v...7/scotflag.gif http://i680.photobucket.com/albums/v.../scot2flag.gif "If women are so bloody perfect at multitasking how come they can't have a headache and sex at the same time?" Billy Connolly |
#7
|
||||
|
||||
Lorinser Knock off. Check the ET and they will say what size they are inside the on the hub that the center cap covers. If not there look on the back of the hub. Sometimes the et is stamped (as a ref. )16mm.
I don't know the correct offset for a 300TD, but it's ET11 to ET25 for the 126's. Bolt pattern is 5 X 112
__________________
1986 Euro 500SEC "RUF" 9:1CR, "Rose" 1985 Euro 500SEC Cabriolet AMG Widebody 1982 Euro 500SEL "Blue" 2001 Texas Heeler (Aussie/Queensland X) "Sulphie", 2012 Queensland Red Heeler "Squeak" Best dogs I've ever had. |
#8
|
||||
|
||||
There are 3 of those wheels w/o the center caps at my local yard. Not perfect though, but not quite my taste.
__________________
1983 123.133 California - GreaseCar Veg System |
#9
|
||||
|
||||
The only thing worse than 3 of those wheels is 4 of them. At least with 3 you aren't tempted to put them on your car......
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#10
|
||||
|
||||
I've got 4 of these (with caps). Chrome is peeling badly; I need to have them stripped and refinish (prime & paint) them, or just sell them. Anyone interested? $75 would make me happy... I have too many wheel sets as it is. And yes, they are NON-OEM wheels (knock-offs).
__________________
1992 300D 2.5T 1980 Euro 300D (sadly, sold) 1998 Jetta TDI, 132K "Rudy" 1974 Triumph TR6 1999 Saab 9-5 wagon (wife's) |
#11
|
||||
|
||||
they do look great on 126
gives them big wide stance, ive seen a black 126 on same exact rims, looked slick |
#12
|
|||
|
|||
Quote:
I'd love a set of those for on my black 126! |
Bookmarks |
|
|