PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Mercedes-Benz Wheels & Tires (http://www.peachparts.com/shopforum/mercedes-benz-wheels-tires/)
-   -   BBS RS 010 Fittment on W123 (http://www.peachparts.com/shopforum/mercedes-benz-wheels-tires/385771-bbs-rs-010-fittment-w123.html)

BirthdayBenz 05-03-2017 10:00 PM

BBS RS 010 Fittment on W123
 
Hello,

I've no experience figuring out what wheels will fit with out actually mounting them.

There are a set of BBS RS wheels for sale about an hour drive from me. They're stamped 7J x 15 H2 ET38. Anyone running offset that high on a w123? From all the posts I've browsed looks like these wont fit.

I'd be willing to run a 10mm spacer but would think I shouldn't run much more than that.

Anyone have some experience with something like this?

Dmitry at Pelican Parts 05-04-2017 05:21 PM

Take a look at the link below - it's a great guide that will help you figure out the fitment and spacing.

Wheel Fitment & Spacing Guide

DeliveryValve 05-22-2017 04:01 PM

I have a set of BBS 16x8 et11 on my 123. Perfect fit in rear. On the front, a slight poke. But I like it.
Sometimes folks run a staggered et11 and et23 to prevent that slight poke.

Now I've also ran a set of 15x6.5 et37 8 hole Mercedes wheels with cheap 10mm spacers. Not too bad, but I do think it was pretty wide and should be run with hubcentric type spacers. Definitely needed longer bolts.

I would imagine with the wider rim, 7 vs 6.5, and the et38, you'll need a wider than 10mm spacer to clear the front tie rod.


.


All times are GMT -4. The time now is 04:50 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website