|
|
|
#1
|
|||
|
|||
type 8 lug bolts
Hello im looking for the right size lug bolt that will fit a type 8
rim to a 85 300sd. Any help would be appreciated.
__________________
1985 300sd |
#2
|
|||
|
|||
The non-cognoscenti among us are at a disadvantage. Type 8?
Even if for ten words, a picture is of value. |
#3
|
|||
|
|||
__________________
1985 300sd |
#4
|
|||
|
|||
Generally referred to as an "8-hole" wheel.
The 85 chassis (W126) will operate acceptably with ETs (offset) of 25, better with 20-21. That 8-hole wheel will probably have an ET in the high 40s. Hence it will require a spacer of 25-28 mm. Inquire of the wheel vendor as to the actual ET, and whether it uses 12mm or 14mm bolts. The 126 uses 12mm. |
#5
|
|||
|
|||
Quote:
The term " Type 8" reminded me of the /8 cars made in the late 60s, called the " Stricht 8" in Germany.
__________________
Strelnik Invest in America: Buy a Congressman! 1950 170SD 1951 Citroen 11BN 1953 Citroen 11BNF limo 1953 220a project 1959 180D 1960 190D 1960 Borgward Isabella TS 2dr 1983 240D daily driver 1983 380SL 1990 350SDL daily driver alt 3 x Citroen DS21M, down from 5 3 x Citroen 2CV, down from 6 |
#6
|
|||
|
|||
Quote:
Thanks for enhancing the self-esteem of the non-cognoscenti! Grazie! Or as the Albanians say : Faleminderit!
__________________
Strelnik Invest in America: Buy a Congressman! 1950 170SD 1951 Citroen 11BN 1953 Citroen 11BNF limo 1953 220a project 1959 180D 1960 190D 1960 Borgward Isabella TS 2dr 1983 240D daily driver 1983 380SL 1990 350SDL daily driver alt 3 x Citroen DS21M, down from 5 3 x Citroen 2CV, down from 6 |
#7
|
||||
|
||||
I had a set of aftermarket 15 inch, 8 hole wheels (sim to late W124) and they were 25mm offset to fit the W126 / W123 chassis.
Came from Tire Rack, I recall. Jim
__________________
14 E250 BlueTEC black. 45k miles 95 E320 Cabriolet Emerald green 66k miles 94 E320 Cabriolet Emerald green 152k miles 85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles |
#8
|
|||
|
|||
I found these numbers on the inside of the rims
61/2jx1sh2 124401j802
__________________
1985 300sd |
#9
|
|||
|
|||
Quote:
Keep scrubbing; the ET is there also. 6 1/2 x 15 wheels had ETs of 48 or 49. |
#10
|
|||
|
|||
et 44
__________________
1985 300sd |
#11
|
|||
|
|||
Ergo, a spacer 23-24 mm thick. Then the question of bolt length can be addressed. |
#12
|
|||
|
|||
And where can you get these spacers?
__________________
1985 300sd |
#13
|
|||
|
|||
Anybody know where i can get the spacers at?
__________________
1985 300sd |
Bookmarks |
|
|