|
|
|
|
|
#1
12-06-2011, 01:33 AM
|
||||
|
||||
|
Suspension kit rear multi link
Suspension Control Arm Kit
Enter: 210-350-99-99-MY or click one of these links. http://www.pelicanparts.com/cgi-bin/ksearch/pel_search.cgi?SUPERCAT_FLAG=Y&make=MBZ&please_wait=N&forumid=&threadid=&command=DWsearch&descriptio n=210-350-99-99-MY&x=12&y=7 Contains: Six: Spacer sleeves. Two: 210 350 33 06 upper front with 12mm bolt hole. Two: 210 350 34 06 upper rear with 12mm bolt hole. Two: 210 350 38 06 lower front with 12mm bolt hole. Two: 210 350 21 53 center (one end with ball joint). Six: short bolts. Six: long bolts Two: Eccentric Cam bolts. Two: Eccentric Cam washers. Six: Lock washers. Six: Three arm retaining washers. Fourteen: Nuts.  http://www.pelicanparts.com/cgi-bin/ksearch/pel_search.cgi?SUPERCAT_FLAG=Y&make=MBZ&please_wait=N&forumid=&threadid=&command=DWsearch&descriptio n=210-350-99-99-MY&x=12&y=7 Chassis application: All: W124 All: R129 All: W170 All: W201 All: W202 All: W208 All: W210 In almost every case you will need to replace the following additional parts. Joint, x2 MB# 2203520227 Rubber mount, x2 Rear of differential, if equiped. Rubber mount, x2 Front of differential, if equiped. inspect the following and replace as needed. Rubber mount, x2 Rear lower control arm inner bushing. Home-made $15 W124 rear knuckle - LCA Bushing Tool Home Made Special Tools, This is where members can share how they made special tools 124 carrier bushing R&R Mercedes W124 Rear Suspension Guide NOTE – All prices on special order parts subject to change without notice. .
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ Last edited by whunter; 12-03-2012 at 02:55 AM. 
|
|
#2
05-14-2012, 04:24 PM
|
||||
|
||||
|
does this kit come with the spacers for the camber arms or is that if only reusing original hardware?
|
|
#3
05-15-2012, 01:15 PM
|
||||
|
||||
|
Answer
Quote:
Six: Spacer sleeves. Two: 210 350 33 06 upper front with 12mm bolt hole. Two: 210 350 34 06 upper rear with 12mm bolt hole. Two: 210 350 38 06 lower front with 12mm bolt hole. Two: 210 350 21 53 center (one end with ball joint). Six: short bolts. Six: long bolts Two: Eccentric Cam bolts. Two: Eccentric Cam washers. Six: Lock washers. Six: Three arm retaining washers. Fourteen: Nuts.
|
|
#4
10-23-2012, 11:25 PM
|
||||
|
||||
|
Looking at this kit again, I see no brand. Other sites sell a melye kit just like this. Same kit?
|
|
#5
10-24-2012, 01:43 PM
|
||||
|
||||
|
Answer
Yes, it is a Melye kit.
.
|
 |
| Bookmarks |
|
|
Linear Mode
