Cylinder head service parts list OM617 turbo
 

This is a general OM617 turbo cylinder head service, Parts list.


seal ring, turbo drain tube (the second is in the short block gasket kit).
MB# 0049975348

o-rings, oil accumulator upper oil pan
MB# 0069972645

Glow Plug, Pole Type Element 12 mm Thread x5 per engine
MB# 0001598301

thermostat
MB# 6172001815

Bypass hose
MB# 900271042012

Cylinder Head Bolt, (5 Per engine, stretch to yield, junk used ones)
MB# 6159900112

Cylinder Head Bolt, 10 X 120 mm, 12 Point Allen Head, (9 Per engine, stretch
to yield, junk used ones)
MB# 6159900212

Cylinder Head Bolt, (8 Per engine, stretch to yield, junk used ones)
MB# 6159900312

Valve Cover Gasket
MB# 6170160180

Head Gasket Set
MB# 6170108820

turbo reseal kit/Turbo Installation Kit, Contains: (1) Turbo Mount Gasket, (1) Exhaust Manifold, Gasket, (2) Oil Line Gaskets, (4) Seal Rings
MB# 6170900680

seal ring, turbo connector to intake, the second is in the turbo re-seal kit)
MB# 0049975448

Prechamber Heat Shield At Diesel Nozzle Tip, (5 Per engine)
MB# 6170170360

Oil Filter Kit. Contains: (1) Filter Cartridge Plus Seals
MB# 000180250967

*************************************************
*************************************************
*************************************************

You may also want or need the following parts...

Chain Tensioner, timing chain
MB# 6170500211

"IWIS" Master Link, Double Row Timing Chain
MB# 0039976294

Chain Tensioner Rail, (Clamping Lever)
MB# 6150500916

Timing Chain Guide, NOTE: This Nylon Guide Replaces Two Previous
Metal/Rubber Chain Rails.
MB# 6150501416

Valve Stem Seal Kit, (1 Per ENGINE)
MB# 6170500067

Screw collar, injector mounting
MB# 6150170003

Prechamber, diesel injection
MB# 6170100352

Seal ring, STANDARD SIZE, for setting diesel injection prechamber deck height = the CRITICAL GAP between piston and prechamber.
MB# 6150170060

Seal ring, SIZE 1 = 2.3 MM, for setting diesel injection prechamber deck height = the CRITICAL GAP between piston and prechamber.
MB# 6150170160

Locking nut, valve adjustment, (10 Per engine)
MB# 6150530120

Intake Valve, 10 mm Shaft Diameter (5 Per engine)
MB# 6170530001

Exhaust Valve, 10 mm Shaft Diameter (5 Per engine)
MB# 6170500027

Intake Valve Guide, STANDARD, 14 MM
MB# 6160530329

Exhaust Valve Guide, STANDARD, 14 MM
MB# 6160530330

Repair Kit For Vacuum Pump, Piston Type, Includes Seals and Valves
MB# 0005861723

water pump gasket
MB# 6162010080

lift pump valve kit
MB# 0000900210

Fuel Filter, Spin-on Type
MB# 0010923201

Diesel Fuel Pre-Filter, (In-Line Filter) With 90 deg. Elbow
MB# 0014776601

primer pump
MB# 0000908850

Breather line
MB# 1152000058

Wastegate Hose
MB# 0000980783

Air Filter Housing Mount
MB# 6159880011

Air Cleaner Bracket
6170900340

Engine Mount
MB# 1232413013


.

Could someone (Roy if you've got them) post the part numbers for the
1. Pulley to flywheel bolts
2. Manifold nuts
3. Manifold washers

Answer
 

Manifold NUT
MB# 910113010004

Manifold washer
MB# 1169901140

Pulley to harmonic balancer
screw, x6
MB# 000912008203



.