Does anyone know the Part # for the Metal inserts which go inside of the rubber ends of the Euro Bumpers, the one piece styles? These would go inside the FRONT ends, L & R. The one piece is just that, a front pieces, with rubber ends on both sides. Inside the rubber end pieces is a metal bracket / support. I am looking for that part #s, L&R.

The rear has the same set up, but mine still have not crumbled.

I will try to find a part #, but the parts are way too rusted.

Rest of World (ROW) aka "Euro" bumper reinforcement.

123 880 26 16 Right
123 880 25 16 Left






.

Attached Thumbnails

 

__________________
1983 123.133 California
- GreaseCar Veg System

Thanks DV ... Are those the ones for the one piece Euro Bumper? My sedan has the 3-piece Euro Bumpers and they look like that. OR, do both styles use the same ones? In any event, thanks !

Yes one piece bumper and the three piece are similar, but not as wide on the rubber mount area.

Part numbers for the 3 piece bumper reinforcement:
123 880 24 16 Right
123 880 23 16 Left




.

__________________
1983 123.133 California
- GreaseCar Veg System

Btw- those inner, under the rubber bumper parts always rust. Both North American Market (NAM) and ROW bumpers. Seems they are coated with a single layer of of cheap black paint with no primer. If you end up getting new - dealer parts, consider adding a few more coats of paint on them for longevity. Or totally stripping them and repainting them correctly.

The last couple of sets of used Californian bumper reinforcements I removed were all surfaced rusted. I ended up soaking them in citric acid to remove all the rust and recoating them properly with chassis paint.

Old repainted pieces really don't need to be physically perfect only sound enough to hold the rubber inserts/ends. You won't see them when installed.


.

__________________
1983 123.133 California
- GreaseCar Veg System

I'm in search of the 3 piece design as well.
Part #
123-880-23-16
123-880-24-16

I have a set of the one piece euro design, but never thought to try fitting them. Anyone have experience fitting the one piece to the three piece rubber successfully?

__________________
Then I heard the voice of the Lord saying, "Whom shall I send? And who will go for us?" And I said, "Here am I. Send me!"