got a dead '83 300D Turbo; anyone want parts? (I need help, too) - Page 4 - PeachParts Mercedes-Benz Forum

Hole-Shot · #46 08-03-2006, 12:26 PM

Quote:

Originally Posted by pat77

I could really use the rear seat belts, front grille would be awesome, and vacuum pump if possible. Please let me know with prices.
would also need them shipped please, zip is 38016

thanks =)
Ben

I'll try and get out the rear seat belts. The front grille I tried to get off but I couldnt. Time to revisit it...

Vacuum pump I'm gonna need, as it is a motor part.

I'll let you know

Hole-Shot · #47 08-03-2006, 12:28 PM

Quote:

Originally Posted by speedy82

How did it go yesterday? Any luck on the blower motor?

It was my girl friend's birthday and I forgot.

I tried to tell her that the mercedes had higher priority, but that didn't go so well.

I took the day off from work today to get some shiznit done that I've needed to do for the past 4 weeks. This includes getting most of the crap off of the mercedes.

I'm going to go through the list of parts to take off the car, and go through my list of PMs to see what people still want. Today I'm going to try and pull everything, tomorrow I'm going to try and get it all boxed up and weighed (after work) by UPS so I don't get screwed on shipping as I have been so many times before.

I'm really sorry about the wait, everyone, but this has been the worst month EVER financially and physically draining. Hence the reason I'm parting out the car...

Hole-Shot · #48 08-03-2006, 02:23 PM

Got the seatbelts, first aid box, headlights, tail lights, turn signals, and blower motor out today.

How do I get the receivers for the seatbelts off? I can't seem to figure them out...

tobybul · #49 08-03-2006, 02:31 PM

Quote:

Originally Posted by Hole-Shot

Got the seatbelts, first aid box, headlights, tail lights, turn signals, and blower motor out today.

How do I get the receivers for the seatbelts off? I can't seem to figure them out...

Holeshot, if you can't get the reciever off, thats ok cuz I need the other end (male) anyway

techguy512 · #50 08-03-2006, 04:01 PM

Hole-shot,

Forgot to ask about this little trim piece (driver's side). If it's still
available and it's not too late, I would also like to have it in addition to
the wiper arms.

Bob

rg2098 · #51 08-07-2006, 11:55 AM

Hole-Shot, did you get my PM last week?

ylwgto · #52 08-07-2006, 06:09 PM

is the car silver? if so i am interested in the driver-side front fender and the air dam body pieces under the front bumper. also possibly the brake booster and the fuel tank sending unit under the first aid kit at the back seat. if the shocks are decent i might be interested as well. lemme know prices and what you think it migth cost to ship any or all to nyc (10009). thanks. if you take out the plugs you won't be battling compression to manually turn the crank, especially if the engine is already out of the car. thanks.

dmorrison · #53 08-09-2006, 01:26 AM

Want to summarize and add to my order.

Changed this order 8/11/06
Again order changed 8/13/2006
Wanted, and already ordered
-- passenger C pillar cover.
-- Drivers seat center armrest, if not torn, faded is OK *** Delete this item**8/13/06
-- Both visors with mirrors, IF the hinges are not broken, mine are and thats what I'm trying to improve
-- Passenger side fog light **DELETE THIS ITEM** 8/11/06

Add
-- Passenger side B pilar cover, If the MBTEX is not torn or ripped
-- Drivers left foot panel, the one to the left of the parking brake assembly
-- Drivers left foot rest, just in front and under the parking brake lever.
-- A front seat Female seatbelt unit. As long as the black plastic is not damaged. Both front units are interchangable so either one.

Removing the front seat female section is easer done by removing the front seat, or at least unbolting the seat. 4 bolts in the slide rails and you can move it. Then it's just a matter of unbolting the seat belt unit at it's base.

If you need any instructions on removing the items let me know.

Dave

PS 8/11/06 I do not need the fog lights any more I know someone else wanted them

pdrayton · #54 08-09-2006, 07:34 AM

Hi,

I need a cruise control switch for my 240D. Same as 300D, I checked part #s?

What is a reasonable price? $15...$20 with shipping. No rush, usps parcel is fine. picture at
http://img.eautopartscatalog.com/live/P502012259OES.JPG

Also, how much would you want for a front passenger bendix caliper?

thanks.

paul@pauldrayton.com

speedy82 · #55 08-13-2006, 09:24 AM

hello, still waiting on news on the blower motor. last I know is that you got it out. please contact me so I can pay for it and get my grubby little hands on it.

tobybul · #56 08-14-2006, 09:13 AM

Has anyone heard from Holeshot about any of the parts?

240D-Tank · #57 08-14-2006, 10:02 AM

If the you still have the rear right fender trim availible I am in need to replace a current damaged one. Let me knwo if you still have it and what you are looking for in price. Thanks