I'll have to look at the pan. A blown rod often damages it too. I may have a loose pan that is good though. I have one or two but I am not sure what they are off.

That engine looks to be a good deal, actually.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

OK, I just checked. I have a good pan which I will sell to you for $30. I also have three starters. I have not checked to see if they are all diesel starters, but If I have two for diesels that work I will sell you one of them. If you are satisfied with a rebuildable core I will sell one that way regardless of the condition of the others. I also have several good oil pumps, though the one in the engine with the broken rod probably is good.

If you want a rebuildable core alternator I will throw one of those in for no charge.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Tom,

If you have an upper and lower oil pan that's already loose that's all the better, as I plan on doing a "seriestrek" style modification on it for my Jeep anyway.

I have one good starter on hand but wouldn't mind picking up a spare. Also have one good alternator but contemplating going with a one-wire Delco instead.

I have a second upper only oil pan...the aluminum part. if you decide to take stuff I will check the starter to be sure it works.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Tom,

Do you have engine support arms for the 617.952 (82-85 300TD sedan)

Also looking for 123 diffs 2.88 or 3.07

Or drive shaft for 82-85 300TD or 300TDT

Robert Kohut
Northern VA
703 598-5437

__________________
83 300D 328k mi (623) Light Ivory - daily driver
82 300D 166k mi (881) Thisle Green - fixer upper
82 300D 282k mi (473) Champagne - parts

I have engine support arms from a 300cd which should be the same. I may have a driveshaft too. If you can give me the overall length I can check it.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

As long as the 300CD is a turbo, the support arms should fit.
Pass Side
617 223 40 04 or 617 223 42 04
Drivers Side
115 223 17 04

I'm out of town and can't get an overall driveshaft length right now but EPC says
front half # === 123 410 58 01
whole shaft # = 123 410 83 06
No # for rear half.

__________________
83 300D 328k mi (623) Light Ivory - daily driver
82 300D 166k mi (881) Thisle Green - fixer upper
82 300D 282k mi (473) Champagne - parts

I need a blower motor and aux. fan How much do you want for them and willyou ship them. wtr

I have some blowers. What model do you have?

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Hi,

Please let me know the condition of the trunk emblems and how much you would like for them. I am interested in the "240D", the Mercedes Star and "Diesel" trunk emblems. Please let me know. Thanks.

Best Regards,
Louis

I don't think I have any extra that are very good.

I have a 240d emblem that is a little crooked to spare and probably a diesel emblem, but the only star I have is pretty corroded. If you want them I will let you have them for shipping and a little handling.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Im looking for a passenger side front turn signal if you have it. Had a argument with a deer the other night, the deer lost.

shipped to 27829?

__________________
"Ninja monkeys are meeting as we speak, plotting my demise."

1982 300D "Melba" 332k
1985 4Runner "billygoat" 204k

I'll look.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Still have lots of stuff.

Tom W

__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC]

..I also have a 427 Cobra replica with an aluminum chassis.

Need a complete auto tranny for a friend's 240D. Do you have any?

__________________
1987 300SDL 314K mi, counting; #22 Head
1999 E300Turbo 405K original miles
1997 E320 180K mi (Son's)
2002 ML320 (Son's)
1998 S320 140K mi (Son's) sold
1985 300SD 311K mi
1984 300D 324K mi (killed by a hit-n-run turd)
*************************************